superbrightleds RLMK Series User Manual

Important: Read all instructions prior to installation.
Off-Road Rock Light Kit
Installation
Warning: Before making any connections to the automotive wiring,
always disconnect the battery negative terminal
1. Disconnect negative battery terminal.
2. Mark the drill hole locations using the rock light as a template.
3. Mount rock lights and Bluetooth controller, routing switch to an easily
accessible location.
4. Connect lights to harness and connect supply wiring to battery power.
Locking Remote
The remote can be locked so that it only communicates with one
controller. By default, any remote will work with any RLMK kit. To lock
the remote press and hold the orange lock button for five seconds.
To unlock, press and hold the yellow unlock button for five seconds.
RLMK-RGBW12-4 shown
Safety and Notes
• To reduce the risk of electric shock, ensure that the main power source is
disconnected/off before performing any installation or wiring procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached. Failure to properly attach lights
may result in damage or injury, for which the manufacturer does not assume
responsibility.
Specifications
Operating Temperature
IP Rating
Input Voltage
Lock
Unlock
Rev Date: V1 04/26/2023
4400 Earth City Expy, St. Louis, MO 63045
User Manual
RLMK Series
Specifications
-4°–122° F (-20°–50° C)
IP68 (submersible up to 2 m)
9–32 VDC
866-590-3533 superbrightleds.com