superbrightleds ELS-RW User Manual

superbrightleds ELS-RW User Manual

Led emergency light

Advertisement

Important: Read all instructions prior to installation.
LED Emergency Light

Included Parts

1 - fixture
1 - hardware kit

Specifications

ELS-RW
Total Power Consumption
1.9 Watts
Operating Voltage Range
120/277 VAC
Operating Temperature
50°–104° F (10°–40° C)
Environmental Rating
damp or dry location
Fixture Weight
3.75 lb (1.7 kg)
Recommended Mounting
7.5 ft (2.3 m) high, 26 ft (7.9
m) center-to-center spacing
between lights

Safety and Notes

• This product should be installed and serviced by a certified electrician
in accordance with applicable national, state, and local building and
electrical codes.
• Light must be maintained, tested, and serviced in accordance with all
applicable National Fire Protection Association (NFPA) and local codes.
• To reduce the risk of electric shock, ensure that the main power source
and circuit breakers are switched off before performing any installation
or wiring procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached and will support the weight
of the fixture. Failure to properly support fixture may result in damage
or injury, for which the manufacturer does not assume responsibility.
• Intended for indoor use only.
• Do not mount near radiant heat sources/heaters.
• Use caution when handling or servicing the battery pack.
Testing
Manual Test
Test button can be held to illuminate lights for manual
testing purposes.
¹Limited 2-year warranty on battery.
N/C
ORANGE
120 V POWER
BLACK
NEUTRAL
WHITE
GROUND
GREEN
¹
Wiring Diagram
N/C
120 V POWER
NEUTRAL
GROUND
277 V POWER
N/C
NEUTRAL
GROUND
4400 Earth City Expy, St. Louis, MO 63045
User Manual
ELS-RW
120 V Wiring
ORANGE
BLACK
WHITE
GREEN
277 V Wiring
ORANGE
BLACK
WHITE
GREEN
Rev Date: V0.1 11/05/2018
866-590-3533
superbrightleds.com
277 V POWER
ORA
N/C
BLAC
NEUTRAL
WHIT
GROUND
GRE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ELS-RW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for superbrightleds ELS-RW

  • Page 1 User Manual ELS-RW Important: Read all instructions prior to installation. LED Emergency Light Included Parts 1 - fixture 1 - hardware kit Specifications ELS-RW Total Power Consumption 1.9 Watts Operating Voltage Range 120/277 VAC Operating Temperature 50°–104° F (10°–40° C)
  • Page 2 User Manual ELS-RW Important: Read all instructions prior to installation. LED Emergency Light Installation Instructions 1. Remove two screws holding front cover in place. 2. Remove appropriate knockouts for wiring and mounting from real panel. 3. Using an appropriate strain relief (not included), run wiring through rear panel.

Table of Contents