Advertisement
Quick Links
TOOLS NEEDED
Ratchet with 7/16" socket
Ratchet with 1/2" socket
1/2" Open end or box end wrench
5/32" Allen wrench
Rubber Mallet
COMPONENT PARTS
ASSEMBLY HARDWARE -
ASSEMBLY
The assembly is a two-person operation.
Inspect the shipping container contents for damage and to
1.
determine that all components and hardware are present.
2.
Lay all parts on a soft work surface or on the shipping packaging to
prevent damage to finish.
NOTE: Before assembling the nuts to the bolts, it is
recommended that a light oil or petroleum jelly be applied to the
screw threads.
3.
Locate the seat support and place the support on the
work surface upside down with the seat platforms oriented
downward. Insert a plug in the hole on the bottom of each
seat support. Use a rubber mallet to seat the plug.
© 2024 ANOVA®
Assembly Instructions
Beacon Hill 4-Seat Tables with Contour Swivel Seats
BH1840SR – Recycled Plastic Table, 4 Swivel Seats
BH1840SR-GT - Recycled Plastic Game Table, 4 Swivel Seats
BH1840ST – Thermory® Table, 4 Swivel Seats
All hardware is stainless steel.
(800) 231-1327
specify@anovafurnishings.com
anovafurnishings.com
JUNE-2024
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Anova Beacon Hill BH1840SR
Summary of Contents for Anova Beacon Hill BH1840SR
- Page 1 Locate the seat support and place the support on the work surface upside down with the seat platforms oriented downward. Insert a plug in the hole on the bottom of each seat support. Use a rubber mallet to seat the plug. © 2024 ANOVA® JUNE-2024...
- Page 2 1/2" open end or box end wrench and a 5/32” Allen wrench for the outer circle bolts. Note: Be careful not to over tighten the bolts; the inserts they thread into could unseat and begin to spin with the bolt. © 2024 ANOVA® JUNE-2024...
- Page 3 You may have to lift the tabletop slightly to get the holes to align. Leave the bolts finger tight until all of the bolts are started, then use the 5/32" Allen wrench to tighten the bolts. Note: Be careful not to over tighten the bolts; the inserts they thread into could unseat and begin to spin with the bolts. © 2024 ANOVA® JUNE-2024...
- Page 4 This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to remove surface dirt. • Do not clean with a solvent or petroleum based products. Manufactured in the U.S. © 2024 ANOVA® © 2024 ANOVA® JUNE-2024 JUNE-2024...
Need help?
Do you have a question about the Beacon Hill BH1840SR and is the answer not in the manual?
Questions and answers