Advertisement
Contact Us:
800.231.1327
specify@anovafurnishings.com
Tools Needed:
• 3/4" Hex Wrench
• 3/4" Hex Socket with Ratchet
• 7/16" Hex Wrench
• 7/16" Hex Socket with Ratchet
• Retractable Measuring Tape
• Pencil
Component parts:
Seating Sections
Hardware Needed:
1/2"-13 x 1.25" Stainless
Steel Hex Head Bolts
Steel Washers
Supports
Single Section Assembly:
NOTE: Before assembly, it is recommended that a light oil or petroleum jelly be applied to screw threads. During
!
initial assembly, only tighten hardware to finger-tight until assembly is complete. Assembly of any Infinity
bench requires at least two people.
1.
Inspect the shipping container contents for damaged or missing components. Quantities will vary depending on
configuration and order.
a.
Lay all parts on a soft work surface or on the shipping packaging to prevent damage to finish. It is
recommended that the parts be positioned where the bench will be installed as once the bench is fully
assembled it may be too big and heavy to reposition.
1/2"-13 Stainless
Steel Hex Nuts
1/2" Stainless
Assembly Instructions
Infinity Modular Seating System
Infinity Powder Coated Benches
End Caps
1/4"-20 x 1" Stainless
Steel Hex Head Bolts
End Caps and Joining Straps
Joining Straps
1/4" Stainless
Steel Washers
Supports
1/4"-20 Stainless
Steel Hex Nuts
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Anova Infinity Modular Seating System
Summary of Contents for Anova Infinity Modular Seating System
- Page 1 Assembly Instructions Infinity Modular Seating System Infinity Powder Coated Benches Contact Us: 800.231.1327 specify@anovafurnishings.com Tools Needed: • 3/4” Hex Wrench • 3/4” Hex Socket with Ratchet • 7/16” Hex Wrench • 7/16” Hex Socket with Ratchet • Retractable Measuring Tape •...
- Page 2 Assembly Instructions Infinity Powder Coated Benches End Cap End Cap Support Seat Section Support Locate the End Caps to the bench and attach them to the end of the bench using the included end cap hardware. For Linear Sections: Find one of the two identical End Caps and slot it into the end of the bench.
- Page 3 • This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to remove MAINTENANCE surface dirt. Do not clean with a solvent or petroleum based products. 09/27/2022 Copyright 2022 Anova ® Manufactured in the U.S.
Need help?
Do you have a question about the Infinity Modular Seating System and is the answer not in the manual?
Questions and answers