Anova D1007 Assembly Instructions

anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
• 1/2" Open-end or box-end wrench
• Ratchet with 1/2" socket
• Level
• Rubber Mallet
TABLE COMPONENTS:
(2) Table Supports
ASSEMBLY HARDWARE: All hardware is stainless steel.
(16) 5/16"-18 x 1 1/4" (16) 5/16-18
Hex Head Bolts Nylock Nuts
ASSEMBLY:
The assembly is a two-person operation.
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
NOTE: Before assembling the nuts to the bolts, it is
recommended that a light oil or petroleum jelly be applied to
the screw threads.
2. Place the tabletop upside down on the shipping packaging or
other soft surface to avoid scratching the product. Locate one
of the supports and position it near the end of the tabletop.
3. Align the mounting holes in the support with the holes in
the bracket on one end of the tabletop. Install a washer onto
one of the provided bolts and insert the bolt through onto
one of the provided bolts and insert the bolt through one of
the mounting holes in both parts, with the bolt head on the
outside surface of the support. Install a washer and nylock
nut on the inside end of the bolt.
NOTE: Installing the bolt in this direction reduces the risk of
scratching during use.
Leave the hardware finger tight so that adjustments can be
made during assembly and leveling.
Install a bolt and washer through the mounting hole in the
support and tabletop bracket, and install a washer and nylock
nut. Again, leave the hardware finger tight.
Assembly Instructions
D1007 Picnic Table
D1105
Picnic Table
D2003 Picnic Table
D2003COM Picnic Table
D2005 Picnic Table
D2006 Picnic Table
D2014
Picnic Table
L2003 Picnic Table
(1) Table Top
(32) 5/16 (4) Rubber Feet
Flat Washers
F1038
F1105
F1149
F2003
F2014
F6420
(2) Seats
Support
Tabletop
packaging cardboard
or other soft surface
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
(2) Cross Braces
Support
Washer
Nylock
Nut
Bolt
Washer
Tabletop
Bracket
1