Advertisement
Quick Links
TOOLS NEEDED
•
Ratchet with 7/16" socket
•
Ratchet with 1/2" socket
•
1/2" Open end or box end wrench
•
5/32" Allen wrench
•
Rubber mallet
COMPONENT PARTS
ASSEMBLY HARDWARE - All hardware is stainless steel.
ASSEMBLY
The assembly is a two-person operation.
Inspect the shipping container contents for damage and to
1.
determine that all components and hardware are present.
2.
Lay all parts on a soft work surface or on the shipping
packaging to prevent damage to finish.
NOTE: Before assembling the nuts to the bolts, it is
recommended that a light oil or petroleum jelly be applied
to the screw threads.
3.
Locate the seat support and place the support on the
work surface upside down with the seat platforms oriented
downward. Insert a plug in the hole on the bottom of each
seat support. Use a rubber mallet to seat the plug.
© 2019 ANOVA®
ASSEMBLY INSTRUCTIONS
Beacon Hill 3-Seat ADA Tables with Contour Swivel Seats
BH1830SR – Recycled Plastic ADA Table
BH1830SR-GT - Recycled Plastic ADA Game Table
BH1830ST – Thermory® ADA Table
BH1830ST-GT - Thermory® ADA Game Table
Thermory with Contour
Seats
(800) 231-1327
specify@anovafurnishings.com
anovafurnishings.com
Recycled Plastic with Contour
Seats
MAR-2024
1
Advertisement
Related Manuals for Anova Beacon Hill BH1830SR
Summary of Contents for Anova Beacon Hill BH1830SR
- Page 1 Locate the seat support and place the support on the work surface upside down with the seat platforms oriented downward. Insert a plug in the hole on the bottom of each seat support. Use a rubber mallet to seat the plug. © 2019 ANOVA® MAR-2024...
- Page 2 1/2" open end or box end wrench and a 5/32” Allen wrench for the outer circle bolts. Note: Be careful not to over tighten the bolts; the inserts they thread into could unseat and begin to spin with the bolt. © 2019 ANOVA® MAR-2024...
- Page 3 You may have to lift the table top slightly to get the holes to align. Leave the bolts finger tight until all of the bolts are started, then use the 5/32" Allen wrench to tighten the bolts. Note: Be careful not to over tighten the bolts; the inserts they thread into could unseat and begin to spin with the bolts. © 2019 ANOVA® MAR-2024...
- Page 4 This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to remove surface dirt. • Do not clean with a solvent or petroleum based products. Manufactured in the U.S. © 2019 ANOVA® MAR-2024...
Need help?
Do you have a question about the Beacon Hill BH1830SR and is the answer not in the manual?
Questions and answers