Anova Exposition LEX1640 Assembly Instructions

4-seat table with contour seats

Download this manual

(800) 231-1327

specify@anovafurnishings.com

anovafurnishings.com

Assembly Instructions

LEX1640 - Exposition 4-Seat Table with Contour Seats

LEX1641 - Exposition 4-Seat Table with Flat Seats

Tools Needed

Ratchet with 1/2" Socket

Ratchet with 9/16" Socket

1/2" Open end or box end Wrench

9/16" Open end or box end Wrench

#4 Phillips

Component Parts

Hardware Needed

Assembly Instructions

This assembly is a two-person operation.

1. Inspect the shipping container contents for damaged or missing components.

2. Lay all parts on a soft work surface or on the shipping packaging to prevent damage to finish.

NOTE: Before Assembly, it is recommended that a light oil or petroleum jelly be applied to any threads.

JUNE-2024

Need help?

Do you have a question about the Exposition LEX1640 and is the answer not in the manual?

Page 1 2. Lay all parts on a soft work surface or on the shipping packaging to prevent damage to finish. NOTE: Before Assembly, it is recommended that a light oil or petroleum jelly be applied to any threads. © 2024 ANOVA® JUNE-2024...
Page 2 Attach the other seat support to the opposite side of the tabletop bracket in the same manner. After all bolts are installed, use a 9/16” open end or box end wrench and 9/16” ratchet to tighten. © 2024 ANOVA® JUNE-2024...
Page 3 Note: Holding the screw still and turning the Nyloc nut protects the finish on the seat from scratching and chipping during installation. Install the remaining seats in the same manner. © 2024 ANOVA® JUNE-2024...
Page 4 10. Move the table to the location where it will be used. Note: This table is required to be surface mounted prior to use. Follow surface mount instructions provided with the surface mount hardware that you purchase locally. 11. After two weeks, retighten all of the hardware. © 2024 ANOVA® JUNE-2024...
Page 5: Care And Maintenance
• This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to remove surface dirt. Do not clean with a solvent or petroleum based products. Manufactured in the U.S. © 2024 ANOVA® JUNE-2024...

Exposition lex1641