Related Manuals for Charder CUPID 3
Summary of Contents for Charder CUPID 3
- Page 1 USER MANUAL CUPID 3 Infant Scale Please keep the instruction manual at hand all the time for future reference.
- Page 2 This user manual is protected by international copyright law. All content is licensed, and usage is subject to written authorization from Charder Electronic Co., Ltd. (hereinafter Charder) Charder is not liable for any damage caused by a failure to adhere to requirements stated in this manual.
- Page 3 TABLE OF CONTENTS I. SAFETY NOTES ...............4 II. INSTALLATION .............7 III. BASIC OPERATION ............. 8 A. O .......... 9 PERATION NSTRUCTIONS B. S ........ 11 WITCHING BETWEEN DIFFERENT MODES C. M ............12 NSTRUCTIONS IV. TROUBLESHOOTING ..........18 V. SPECIFICATIONS ............19 VI.
- Page 4 I. Safety Notes Thank you for choosing this Charder Medical device. It is designed to be easy and straightforward to operate, but if you encounter any problems not addressed in this manual, please contact your local Charder service partner. Before beginning operation of the device, please read this user manual carefully, and keep it in a safe place for reference.
- Page 5 The device has an expected service life of 5 years when correctly handled, serviced, and periodically inspected in accordance with manufacturer's instructions. Always comply with appropriate regulations when using electrical components under increased safety requirements. Ensure voltage marked on power supply matches mains power ...
- Page 6 All maintenance, technical inspections, and repairs should be conducted by an authorized Charder service partner, using original Charder accessories and spare parts. Charder is not liable for any damages arising from improper maintenance or usage. Disposal This product is not to be treated as regular household waste, but should be taken to a designated collection points for electronics.
- Page 7 II. Installation Remove battery cover on the back of the device and insert 3 x AAA batteries. Slide the measurement tray onto to the device, until it is locked tightly onto the platform.
- Page 8 III. Basic Operation 1. Press key to turn on device. Display will show for about 1 second. 2. Wait until the display shows “0:0.0” or “0.00”. NOTE: If the display shows “0:0.0”, the scale is set to pounds/ounces. If the display shows “0.00”, the scale is set to kilograms/grams. Press to switch between pounds (0:0.0) or kilograms (0.00).
- Page 9 again After weight reading is taken, press to reset weight. The device will automatically re-zero to display “0:0.0” or “0.00”. 4. If there is no weight on the platform and no buttons have been pressed for 15 seconds, the device will automatically turn off. A.
- Page 10 Milk Intake Mode This mode automatically calculates the amount of milk the infant has consumed after feeding. Milk Intake Mode Display Infant & Parent Mode This allows parents to deduct their weight from the result while holding the infant, resulting in the infant’s weight being displayed. Infant &...
- Page 11 B. Switching between different modes Normal mode Milk Intake mode Infant & Parent Mode...
- Page 12 C. Mode Instructions Milk Intake Mode After placing infant on the tray before feeding, the Milk Intake function will save their pre-feeding weight. After feeding, place the infant on the tray once more, and the weight increase (milk intake) will be displayed. After turning on the device, press key until “M”...
- Page 13 Lay the infant on the tray and press to save the weight of the infant in device memory. After infant is removed from tray, device will turn off automatically after 15 seconds. Feed the infant. NOTE: When infant is removed from the tray, LCD screen will display weight difference between current weight and last saved weight.
- Page 14 After feeding, turn on the device, switch to Milk Intake mode, and place infant on tray. Press key to save weight in device. Infant can now be removed from tray. LCD screen will display the weight difference between the current weight and the last weight, which is the milk intake.
- Page 15 Infant & Parent Mode Remove the measurement tray before turning on the device. Press to turn on the device, and press to switch mode to Infant & Parent Mode.
- Page 16 Step onto the device. Stand still until the weight flashes on the screen, indicating a stable weight before stepping off from device. After stepping off from device, weight will return to zero automatically. Hold the infant in your arms, step onto the device, and stand still until the weight flashes on the screen, indicating a stable weight before stepping off from device.
- Page 17 After stepping off from device, LCD screen will display infant’s weight automatically.
- Page 18 Please release height Over length cord. Recalibration required. Zero value lower or higher Check if there are any broken wires inside the than default value device. Device malfunction, please contact your local EEPROM fail Charder service partner for further assistance.
- Page 19 V. Specifications Model CUPID 5 Capacity 0-20 kg / 44 lbs, 20-100 kg / 220 lbs Graduation 0.01 kg / 0.2 lb, 0.05 kg / 0.1 lb Measuring unit kg or lb Measuring 30-160 cm / 1 ft-5 ft 3 in Height Device Weight 1.6 kg...
- Page 20 VI. Declaration of Conformity This product has been manufactured in accordance with the harmonized EU standards, following the provisions of the below stated directives: EC EMC directive 2014/30/EU Test standards: EN61000-6-1:2007 EN61000-6-3:2007+A1:2011+AC:2012 CD-IN-00133 [REV002] 202406...
Need help?
Do you have a question about the CUPID 3 and is the answer not in the manual?
Questions and answers