Page 1
CUPID 3 Test standards: EN61000-6-1:2007 EN61000-6-3:2007+A1:2011+AC:2012 User manual Manufactured by: Charder Electronic Co., Ltd. No.103, Guozhong Rd., Dali Dist., Taichung City 412, Taiwan (R.O.C.) www.chardermedical.com CD-IN-00133 [REV001] 10/2018 Please keep the instruction manual at hand all the time for future reference.
TABLE OF CONTENTS GENERAL INFORMATION ....................3 SAFETY INSTRUCTION ..................... 3 ENVIRONMENTAL ......................4 CLEANING ........................4 MAINTENANCE ....................... 5 WARRANTY-LIABILITY ..................... 5 DISPOSING OF THE SCALE ....................6 PREPARE THE SCALE FOR USE ..................7 INSTRUCTION OF USING THE SCALE ................8 INSTRUCTION OF OPERATION MODE ................
GENERAL INFORMATION Thank you for choosing CHARDER MEDICAL product. All features of this product were designed to state of the art and are optimized for simple and straightforward use. If you have any queries or experience any problems not addressed in the operating instructions, please contact your CHARDER MEDICAL service partner, or visit us on the internet at www.chardermedical.com...
The device meets the requirements for electromagnetic compatibility. Do not exceed the maximum values specified in the applicable standards. If you have any problem, contact your local CHARDER MEDICAL service partner. ENVIRONMENTAL All batteries contain toxic compounds; disposal of batteries should be delegated to a competent organization, complying with the deposit of Poisonous Waste Regulation 1972.
Please release height cord. Over length Replaced parts shall be the property of CHARDER. Should the fault repairs or replacement delivery not be successful, the statutory provisions shall be valid.
If CHARDER provides and individual warranty, this means that the unit supplied will be free of faults for the SPECIFICATIONS length of the warranty period. Model CUPID 5 DISPOSING OF THE SCALE Capacity 0 ~ 20 kg / 44 lbs, 20 ~ 100 kg / 220 lbs...
Clip the height cord to the head stopper. PREPARE THE SCALE FOR USE Remove battery cover on the back of the scale and install 3 x AAA batteries. Pull height cord up and let the kid step onto the platform. Measure height and take reading from display between 30~ 160 cm, 1 ft ~ 5 ft 3 inches.
Slide the tray until it well fixed to the platform. Place the scale on a hard and flat surface. Press to power on the scale. INSTRUCTION OF USING THE SCALE 1. Press button, the display shows about 1s. 2. Wait until the display shows “0:0.0” or “0.00”. Note - Turn the button anticlockwise and pull height cord out.
INSTRUCTION OF OPERATION MODE After stepping off the scale, display will show the baby weight automatically. NORMAL MODE Normal mode is designed for standard weighing requirement. User can measure weight of baby and tare the weight of rug or diaper placing on the tray.
BABY MOMMY MODE Baby mommy mode is designed for people who can easily deduct Step onto the scale. Stand still until the weight double flash to be their weight and measure baby’s weight while cuddling the baby. locked. BABY MOMMY MODE DISPLAY SWITCH BETWEEN DIFFERENT MODES Step off the scale and the weight restore to zero automatically.
MODE INSTRUCTIONS BABY MOMMY MODE MILK INTAKE MODE Remove the baby tray before turn on the scale. Milk Intake function will always store current weight which is placed on the tray and deduct last stored weight and display the differences. Power on the scale and switch to Milk Intake mode with M on the left upper corner.
Page 12
Gently place baby on the tray and press button to lock the weight of baby and store baby weight in the scale memory. When weight is stored in the scale memory, cuddle the baby When you take baby from tray. It will turn off automatically while from the tray.
Need help?
Do you have a question about the CUPID 3 and is the answer not in the manual?
Questions and answers