CHAINTECH S865PE User Manual page 19

APIC Mode:
In order to comply with PC2001 standard, the system is designed to run in APIC (Advanced
Programmable Interrupt Controller) mode. Enabling APIC mode will increase the
available IRQ resources for the system. Available options are [Enabled] and [Disabled].
MPS Version Control For OS:
This item allows you to select which MPS (Multi-Processor Specification) version is used
for the operating system. You need to select the MPS version that is supported by your
operating system. To find out which version to use, consult the vendor of your operating
system. Available options are [1.4] and [1.1].
OS Select (For DRAM >64MB):
If your system's DRAM is larger than 64MB and you are running OS/2, select OS/2 as the
item value. Otherwise, set the item value to Non-OS/2 for all other operating systems.
Small Logo (EPA) Show
This setup allows photo that is EPA. Logo.
Show POST CODE
Enabling this function can show POST error code on the screen before proceeding to
operating system.
Chapter 3
13