Procedure To Use The Reset Button; Resetting The Fsg1100Hn - ZyXEL Communications FSG1100HN User Manual

Chapter 4 Wireless LAN
4. Type "1234" (default) as the password and click Login. In some versions, the
default password appears automatically - if this is the case, click Login.
5. You should see a screen asking you to change your password (highly
recommended) as shown next. Type a new password (and retype it to confirm)
and click Apply or click Ignore.
Password Screen
Note: The management session automatically times out when the time period set
in the Administrator Inactivity Timer field expires (default five minutes).
Simply log back into the FSG1100HN if this happens.
3.3

Resetting the FSG1100HN

If you forget your password or IP address, or you cannot access the Web
Configurator, you will need to use the RESET button at the back of the
FSG1100HN to reload the factory-default configuration file. This means that you will
lose all configurations that you had previously saved, the password will be reset to
"1234" and the IP address will be reset to "192.168.1.254".
3.3.1

Procedure to Use the Reset Button

1 Make sure the power LED is on.
2 Press the RESET button for longer than 1 second to restart/reboot the
FSG1100HN.
3 Press the RESET button for longer than five seconds to set the FSG1100HN
back to its factory-default configurations.
22
FSG1100HN User's Guide