Firewall Filter Screen - ZyXEL Communications FSG1100HN User Manual

8.3

Firewall Filter Screen

The Filter window allows users to view existing filters on the FSG1100HN. To set up a
new filter, click the Add button.
Click Firewall > Filter to open the Filter screen.
Firewall > Filter
The following table describes the filter labels in this screen.
Firewall > Filter
LABEL
Rule Setup
Index
Active
Protocol
Comment
Source
Destination
Setting
Apply
Refresh
FSG1100HN User's Guide
DESCRIPTION
Displays filter index number.
Displays current filter status.
Displays the current filter protocol setting.
Displays information to help identify the port filter and any special
circumstances related to it.
Displays the current MAC address, IP address, and port range of the
source filter.
Displays the current IP address and port range of the destination filter.
Displays the current filter settings.
Click Apply to save your changes back to the FSG1100HN.
Click Refresh to begin configuring this screen afresh.
Chapter 8 Firewall
73