Auto Provision; 11.1 Auto Provision Screen - ZyXEL Communications FSG1100HN User Manual

Chapter 11 Auto Provision

11.1 Auto Provision Screen

The Auto Provision screen allows automatic updating of configurable settings for
configuration files and image files via TFTP, FTP server, or HTTP server.
Click Management > Auto Provision to open the Auto Provision screen.
Management > Auto Provision
The following table describes the auto provision labels in this screen.
Management > Auto Provision
LABEL DESCRIPTION

Auto Provision

Active Enable or Disable the automatic provision feature.
Select the provision method: TFTP, FTP, or HTTP.
Protocol
IP Enter the IP address to be used in auto provisioning.
Address
Port Enter the port to be used in auto provisioning.
Retry Select the number of retry attempts allowed. The range is from 0 to 5
Time attempts.
Timeout Enter an age-out value, in seconds, between 30 and 604800.
Delay Enter a delay time, in seconds, between 30 and 604800.
Time
Apply Click Apply to save your changes back to the FSG1100HN.
88
Auto Provision
FSG1100HN User's Guide
11