Wireless Advanced Settings Screen - ZyXEL Communications FSG1100HN User Manual

4.5

Wireless Advanced Settings Screen

The Wireless Advanced Settings window allows users to configure the Wireless LAN
Interface.
Click Wireless > Advanced Settings to open the Wireless Advanced Settings
screen.
Wireless > Advanced Settings
The following table describes the advanced wireless labels in this screen
Wireless > Advanced Settings
LABEL
Wireless Advanced Settings
Fragment
Threshold
RTS
Threshold
Preamble
Type
IAPP
B/G
Protection
Frame
Aggregation
FSG1100HN User's Guide
DESCRIPTION
This is the threshold, specified in bytes, for the fragmentation
boundary for directed messages. It is the maximum data fragment
size that can be sent. Packets exceeding the 2346-byte setting will
be fragmented before transmission. Enter an even number between
256 and 2346. 2346 is the default.
Data with its frame size larger than this value will perform the
Request To Send (RTS)/CTS (Clear To Send) handshake.
Enter a value between 0 and 2347. 0 means always send RTS.
Choose either Long Preamble or Short Preamble.
affects the timing in the wireless network. There are two preamble
types: long and short. If a wireless device uses a different preamble
type than the FSG1100HN, then it cannot communicate with the
FSG1100HN.
Enable or disable Inter-Access Point Protocol (IAPP). This protocol
is designed for the enforcement of unique association throughout
the Extended Service Set and for the secure exchange of a wireless
station's security context between a current AP and a new AP
during the handoff period.
Enable or disable B/G Protection. This feature limits cross-talk in a
mixed 802.11b and 802.11g environment.
Enable or disable Frame Aggregation. This feature increases
throughput by sending two or more data frames in a single
transmission.
Chapter 4 Wireless LAN
A preamble
35