Wlan Information: Multiple Ap Table - ZyXEL Communications FSG1100HN User Manual

Chapter 4 Wireless LAN
LAN Information
IP Address
IP Subnet Mask
DHCP
System Status
Interface
Status
CPU Usage
Memory Usage
WLAN Information
SSID
Mode
Band
Channel Number
Encryption
WPS
Multiple AP
Summary
Active Session
Refresh
3.4.1

WLAN Information: Multiple AP Table

Click the Multiple AP Table
information includes SSID, Band, Encryption, BSSID, and Associated Clients.
24
This is the LAN port's IP address.
This is the LAN port's subnet mask.
This is the LAN port's DHCP role, Enable or Disable.
These are the devices three types of interfaces.
This is the current status of each interface type.
This displays what percentage of the FSG1100HN's
processing ability is currently used. When this percentage
is close to 100%, the FSG1100H is running at full load,
and the throughput is not going to improve anymore. If
you want some applications to have more throughput, you
should turn off other applications.
This displays what percentage of the heap memory the
FSG1100HN is using.
This is a descriptive name used to identify the
FSG1100HN on the wireless LAN.
This is the level of wireless security the FSG1100HN is
currently using.
This is the manually selected operating frequency
currently being used on the wireless LAN.
This is the manually selected channel number currently
being used on the wireless LAN.
This is the type of encryption security currently being used
on the wireless LAN.
This displays Enabled when the WPS has been set up.
This displays Disabled if the WPS has not been set up.
Click the Detail hyperlink to display the Multiple AP Table.
Click the Detail hyperlink to display the Active Session
Table.
Click Refresh to begin configuring this screen afresh.
Detail hyperlink in the Status screen. Read-only
FSG1100HN User's Guide