Dimension ES-3024 Ethernet Switch
LABEL
Apply
Click Apply to save your changes back to the switch.
Cancel
Click Cancel to begin configuring this screen afresh.
17.4 Service Access Control
Service Access Control allows you to decide what services you may use to access the ES-3024. You may also
change the default service port and configure "trusted computer(s)" for each service in the Remote Management
screen (discussed later). Click Access Control to go back to the Access Control screen.
The following table describes the fields in this screen.
LABEL
Services
Services you may use to access the ES-3024 are listed here.
Active
Select the check boxes for the corresponding services that you want to allow to
access the ES-3024.
Server Port
For Telnet, FTP or web services, you may change the default service port by typing the new
port number in the Server Port field. If you change the default port number then you will have
to let people (who wish to use the service) know the new port number for that service.
Apply
Click Apply to save your changes back to the switch.
Cancel
Click Cancel to begin configuring this screen afresh.
17.5 Remote Management
From the Access Control screen, display the Remote Management screen as shown next.
17-6
Table 17-5 Access Control: Logins
Figure 17-6 Access Control: Service Access Control
Table 17-6 Access Control: Service Access Control
DESCRIPTION
DESCRIPTION
Access Control