Load Factory Defaults; Reboot System; Figure 20-5 Confirm Load Factory Defaults; Figure 20-6 Restart Switch After Load Factory Defaults - ZyXEL Communications Dimension ES-3024 User Manual

Choose a location to save the file on your computer from the Save in drop-down list box and type a
Step 3.
descriptive name for it in the File name list box. Click Save to save the configuration file to your
computer.

20.5 Load Factory Defaults

Press the Click Here button next to Load Factory Defaults to clear all switch configuration information you
configured and return to the factory defaults. The following message appears.
Click OK to go to the next screen.
Click OK to begin resetting all switch configurations to the factory defaults and then wait for the switch to restart.
This takes up to two minutes. If you want to access the switch web configurator again, you may need to change the
IP address of your computer to be in the same subnet as that of the default switch IP address (192.168.1.1).

20.6 Reboot System

Reboot System allows you to restart the switch without physically turning the power off. Press the Click Here
button next to Reboot System to display the next screen.
Maintenance

Figure 20-5 Confirm Load factory Defaults

Figure 20-6 Restart Switch After Load Factory Defaults

Figure 20-7 Confirm Restart The Switch

Dimension ES-3024 Ethernet Switch
20-3