Dell 2145cn User Manual page 71

MESSAGE MEANING
File Name Exist The file name you
have entered already
exists.
File Name The file names you
can use are from
Over Limit
doc001 to doc999.
However, all file
names are used
already.
Fuser Fan There is a problem in
the cooling fan of the
Locked
printer.
Global Address When the device is
unable to locate the
Not Found
given address of the
Global server.
Global Query This is an error
message and displays
Size Exceeded
when the global query
size has been
exceeded.
Global Server When there is a
authentication fail
Auth Failed
while connecting to
the global server this
message displays.
Global Server When no global server
is configured, this
Not Configured
message displays.
Global Server When the device is
unable to find the
Not Found
Global server.
Global Server Network Information
Center (NIC) failed to
Query Timeout
get the proper
response from the
LDAP server within
specified time.
Global Server This error message
displays when there is
Comm Error
a communication error
between the global
server and the device.
Group Not You have tried to
select a group location
Available
number where only a
single location
number can be used,
such as when adding
locations for a Multiple
Send operation.
SUGGESTED
SOLUTIONS
Enter a different file
name.
Delete unnecessary
files.
Open and then close the
front cover.
Check the search ID.
There are too many
search results. Refine
your search by entering
more letters.
Contact a LDAP server
administrator.
Check the authentication
account and password.
Check the LDAP server
configuration settings.
Check the LDAP server
address, The LDAP
server address is
incorrect, or the server
has failed.
Check the LDAP server
setting, LDAP server
setting is incorrect.
Try again.
Contact a LDAP Server
administrator.
Use a speed dial number
or dial a number
manually using the
number keypad.
MESSAGE MEANING
Install The corresponding
part of the printer is
[xxx]
not installed.
Invalid The color part of the
printer is not for your
[xxx]
printer.
Install Toner The color toner
cartridge is not
installed.
Invalid Toner The color toner
cartridge you have
installed is not for your
printer.
Invalid Server The server address
you have entered is
Address
invalid.
IP Conflict The network IP
address you have set
is being used by
someone else.
Line Busy The receiving fax
printer did not answer
or the line is already
engaged.
Low Power The printer is in the
previous stage of the
power save mode.
Mail Exceeds The mail size is larger
than the supported
Server Support
size by SMTP server.
Main Motor There is a problem in
the main motor.
Locked
The multi-purpose
Load Manually
tray is empty in
Press Start Key
manual feed mode.
Memory Full The memory is full.
MP Tray Paper has jammed in
the feeding area of the
Paper Jam 0
multi-purpose tray.
Network Error There is a problem
with the network.
SUGGESTED
SOLUTIONS
Install the part into your
printer.
Install the a Dell-genuine
part designed for your
printer.
Install the color toner
cartridge.
Install the a Dell-genuine
color toner cartridge
designed for your
printer.
Enter the correct server
address.
Check the IP address
and reset it if necessary.
See "Setting up the
network" on page 17.
Try again after a few
minutes.
When data is received, it
switches to on-line
automatically.
Divide your mail or
reduce the resolution.
Open and then close the
front cover.
Load paper in the multi-
purpose tray. See
"Loading paper in the
multi-purpose tray" on
page 28.
Delete unnecessary fax
jobs and retransmit after
more memory becomes
available. Alternatively,
split the transmission
into more than one
operation.
Clear the jam. See "In
the paper feed area" on
page 65.
Contact your network
administrator.
Troubleshooting 71
|