Invacare LiNX DLX-ACU200 User Manual page 5

1.7 General Safety Notes
WARNING!
Risk of Injury or Damage to the Power Wheelchair
Do not install, maintain or operate this equipment before
you have read and understood all the instructions and all
the manuals for this product and all other products that you
use or install together with this product.
— Follow the instructions in the user manuals.
WARNING!
Risk of Serious Injury or Damage to the Power
Wheelchair or Surrounding Property
Wrong settings can make the power wheelchair
uncontrollable or unstable. An uncontrolled or unstable
power wheelchair can cause an unsafe situation such as a
crash.
— Performance adjustments must only be made by
qualified technicians or by persons who completely
understand the programming parameters, the
adjustment process, the configuration of the power
wheelchair and the capabilities of the driver.
— Performance adjustments must only be made in dry
conditions.
1608055-E
WARNING!
Risk of Injury or Damage due to Electrical Shorts
Connector pins on cables connected to the power module
can still be live even when the system is off.
— Cables with live pins should be connected, restrained or
covered (with non-conductive materials) so that they are
not exposed to human contact or materials that could
cause electrical shorts.
— When cables with live pins have to be disconnected, for
example, when removing the bus cable from the remote
for safety reasons, make sure to restrain or cover the
pins (with non-conductive materials).
WARNING!
Risk of Injury or Damage to the Power Wheelchair
Risk of unintended movement of the power wheelchair or
seating system when loose personal belongings (e.g.
jewellery, scarfs) become entangled around the joystick.
— Make sure that any loose items are clear of the joystick
when power wheelchair is powered up.
— Power off power wheelchair immediately to stop any
movement.
1 General
5