Invacare LiNX DLX-ACU200 User Manual page 4

Invacare® LiNX
Other Symbols
(Not applicable for all manuals)
UK Responsible Person
Indicates if a product is not manufactured in the UK.
Triman
Indicates recycling and sorting rules (only relevant for
France).
1.3 Warranty
The terms and conditions of the warranty are part of the general terms
and conditions particular to the individual countries in which this
product is sold.
1.4 Service Life
We estimate a service life of five years for this product, provided it is
used in strict accordance with the intended use as set out in this
document and all maintenance and service requirements are met. The
estimated service life can be exceeded if the product is carefully used
and properly maintained, and provided technical and scientific
advances do not result in technical limitations. The service life can also
be considerably reduced by extreme or incorrect usage. The fact that
we estimate a service life for this product does not constitute an
additional warranty.
1.5 Limitation of Liability
Invacare accepts no liability for damage arising from:
Non-compliance with the user manual
l
Incorrect use
l
Natural wear and tear
l
4
Incorrect assembly or set-up by the purchaser or a third party
l
Technical modifications
l
Unauthorised modifications and/or use of unsuitable spare parts
l
1.6 Intended Use
LiNX DLX-ACU200
The LiNX DLX-ACU200 is a secondary remote module of the LiNX
family, intended to allow an attendant of a powered wheelchair to
interact with the LiNX System.
The DLX-ACU200 remote module allows control of drive and powered
seating functions. Control can be transferred between user and
attendant, and vice versa, via the remote modules in the system.
LiNX DLX-CR400, DLX-CR400LF
The LiNX DLX-CR400 and DLX-CR400LF are secondary remote modules
of the LiNX family, intended to allow powered wheelchair users to
interact with the LiNX System.
The DLX-CR400 and DLX-CR400LF secondary remote modules allow
control of drive, powered seating and connectivity functions
(depending on the configuration of the system). The DLX-CR400 and
DLX-CR400LF remote modules are intended to be used with a LiNX
module/remote module capable of providing information about the
active user input. The DLX-CR400 contains a standard-force joystick,
while the DLX-CR400LF contains a low-force joystick intended for users
who are unable to use a standard-force joystick.
1608055-E