Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Avalue Technology Manuals
  4. Touch Panel
  5. HID-1540
  6. User manual

Avalue Technology HID-1540 User Manual

15.6" medical panel pc
Hide thumbs

Advertisement

Quick Links

Download this manual
Avalue Intelligent Display & System
HID-1540
15.6" Medical Panel PC
User Manual
st
1
Ed- 18 September 2024
Copyright © 2024 Avalue Technology Inc., All Rights Reserved.
DMR No: T92699-00
Part No: E2017H501A0R
st
Rev: 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the HID-1540 and is the answer not in the manual?

Questions and answers

Related Manuals for Avalue Technology HID-1540

Summary of Contents for Avalue Technology HID-1540

  • Page 1 Avalue Intelligent Display & System HID-1540 15.6" Medical Panel PC User Manual Ed- 18 September 2024 Copyright © 2024 Avalue Technology Inc., All Rights Reserved. DMR No: T92699-00 Part No: E2017H501A0R Rev: 1...
  • Page 2 Please contact a service technician or your retailer. Purposes and Applications HID-1540 is intended to be used in healthcare institutions for general purpose as an assisting device for data access – patient information, medical records, media services, and so on. The product is designed for general or special use in the hospital environment.
  • Page 3 3. Repair of the device may also only be carried out by Warning! Because of the danger of electric shock, never remove the cover of a device while it is in operation or connected to a power outlet. HID-1540 Quick Reference Guide...
  • Page 4 6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage. For plug-in equipment, the power outlet socket must be HID-1540 Quick Reference Guide...
  • Page 5 Précaution! Ne remplacez pas la batterie vous-même. Veuillez contacter le FABRICANT. L'ordinateur est équipé d'un circuit d'horloge en temps réel alimenté par batterie. Il existe un risque d'explosion si la batterie n'est pas remplacée correctement. Remplacez uniquement par un type identique HID-1540 Quick Reference Guide...
  • Page 6 IEC 60601-1-1. Everybody who connects additional equipment to the signal input part or signal output part configures a medical system, and is therefore, responsible that the system complies with the HID-1540 Quick Reference Guide...
  • Page 7 Warning! To avoid risk of electric shock, this equipment must only be connected to a supply main with protective earth. Caution! This adapter EDAC EM11011M(18) is a forming part of the medical device. Attention! Ne modifiez pas cet équipement sans l'autorisation du fabricant. HID-1540 Quick Reference Guide...
  • Page 8 MANUFACTURER to replace battery packs. Précaution! Do not use the power adapter that isn’t made for the equipment, supplying the equipment with inappropriate voltage may cause harm to the battery (if any) or even worse burn the equipment. HID-1540 Quick Reference Guide...
  • Page 9 Attention! Risque d'explosion si la batterie est remplacée par un type incorrect. Jetez les piles usagées selon les instructions 17. The product is not used in Category AP or Category APG in an anesthetic gas environment. HID-1540 Quick Reference Guide...
  • Page 10 Explanation of Graphical Symbols Warning: dangerous voltage Caution Note ISO 7000-1641: Follow operating instructions or Consult instructions for use. Direct current. Equipotential Stand-by US Conformance Follow the national requirements for disposal of equipment. Stacking layer limit This side up HID-1540 Quick Reference Guide...
  • Page 11 HID-1540 User Manual Fragile Packaging Beware of water damage, moisture-proof Carton recyclable Handle with care Storage &Transportation Temperature: -20°C ~ 60°C Storage &Transportation Humidity: 10% ~ 95% HID-1540 Quick Reference Guide...
  • Page 12 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. HID-1540 Quick Reference Guide...
  • Page 13 Selection of other channels is not possible. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Shielded interface cables must be used in order to comply with emission limits. HID-1540 Quick Reference Guide...
  • Page 14 EMI sensitive devices in its surrounding which may malfunction therefore. Environmental protection ◼ Follow national requirements to dispose of unit. Manufacturer Avalue Technology Inc. 7F, No.79, Lide St., Zhonghe District, New Taipei City, 235, Taiwan TEL: +886-2-8226-2345 FAX: +886-2-8226-2777 Web: www.avalue.com Information: sales@avalue.com HID-1540 Quick Reference Guide...
  • Page 15 HID-1540 User Manual CONTENT 1. HID-1540 Multi Touch Medical Panel PC Features ........ 17 1.1 Packing List ..................17 1.2 Specifications ..................18 1.3 Front view ..................22 1.4 Rear & Bottom view ................23 1.5 System Dimensions ................24 2.
  • Page 16 4.9.3 Serial port 2 connector (JCOM1) ..............58 4.9.4 RS-422/RS-485 Termination Resistance connector (JCOMS1) ....58 4.9.5 USB connector 1 (JUSB1) ................59 4.9.6 USB connector 2 (JUSB2) ................59 5. General Safety Guide ................60 HID-1540 Quick Reference Guide...
  • Page 17 HID-1540 User Manual 1. HID-1540 Multi Touch Medical Panel PC Features ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ In this chapter, you will get to know all features of our HID-1540 Multi Touch Medical Panel PC. 1.1 Packing List 1 x HID-1540 Medical Panel PC ⚫...
  • Page 18 802.11abgn+acR2+axR2 Wi-Fi 6E BT5.2 Optional Webcam Other Component Optional NFC Storage 1 x M.2 Key M 2280 (PCI-e x4) slot for storage Other Storage Device 1 x Key B 2242 (SATA Signal) for storage Panel LCD Panel BOE NV156FHM-N48 HID-1540 Quick Reference Guide...
  • Page 19 1 x 2 x 5 pin, pitch 2.0mm connector for LPC debug BIOS SPI 1 x 2 x 4 pin, pitch 2.00mm connector for BIOS SPI eSPI 1 x 2 x 6 pin, pitch 2.0mm connector for eSPI debug HID-1540 Quick Reference Guide...
  • Page 20 2 Test frequency : 5~500 Hz 3 Sweep：1 Oct/ per one minute. (logarithmic) 4 Test axis : X,Y and Z axis 5 Test time :30 min. each axis 6 System condition : Non-Operating mode 7 Test curve HID-1540 Quick Reference Guide...
  • Page 21 With CF/SSD: 10Grms, IEC 60068-2-27, Half Sine, 11ms Operating Temperature 0°C ~ 40°C (32°F ~ 104°F) Operating Humidity 40°C @ 95% Relative Humidity, Non-condensing Storage Temperature -10°C ~ 60°C (14°F ~ 140°F) Note: Specifications are subject to change without notice. HID-1540 Quick Reference Guide...
  • Page 22 HID-1540 User Manual 1.3 Front view Camera HID-1540 Quick Reference Guide...
  • Page 23 COM: for Mouse/Ethernet..etc serial port device HDD LED: indicate HDD activities status PWR LED: indicate power status Note! Equipotential terminal needs to be linked to the hospital ground/earth system before booting the system to protect both operator and system HID-1540 Quick Reference Guide...
  • Page 24 HID-1540 User Manual 1.5 System Dimensions (Unit: mm) HID-1540 Quick Reference Guide...
  • Page 25 HID-1540 User Manual 2. Setting Up HID-1540 Multi Touch Panel PCs ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ This chapter gives instructions on how to set up HID-1540 Multi Touch Panel PC and how to connect different cables. 2.1 VESA Mounting 2.2 Cleaning and Disinfecting HID-1540 Quick Reference Guide...
  • Page 26 Installation instructions follow: First attach the wall-mounting to the heat-sink of the HID-1540, securing it in place with four of the M4 x 6mm screws provided. Mount the on the wall, stand or other flat surface.
  • Page 27 Suggested Screw type for mounting Note: 4 pieces of M4 x 8mm~10mm screws Warning! Use suitable mounting apparatus to avoid risk of injury. Attention! Utilisez un appareil de montage approprié pour éviter tout risque de blessure. HID-1540 Quick Reference Guide...
  • Page 28 Follow below step Connecting the Ground pin 1. With system ready, find the equipotential terminal on the rear side of the HID-1540. An equipotential terminal is provided to optionally connect to a hospital ground/earth system. 2. Prepare grounding cable and the other terminal links to the hospital ground/ earth system.
  • Page 29 IEC61000-4-6 standards. Please follow below steps to connect power cable to system. The HID-1540 could only be powered by a DC power adapter (EDAC Model no. EM11011M(18)). Be sure to always handle the power cords by holding the plug ends only.
  • Page 30 HID-1540 User Manual 2.3 Cleaning and Disinfecting During normal use of HID-1540, the device may become dirty and should be regularly cleaned. Cleaning Instructions 1. Turn off the computer before starting clean up. This way, you can see any dirt on the screen; the brightness of the monitor may make you miss some areas.
  • Page 31 Windex Caution! ◼ Do not immerse or rinse the HID-1540 or its peripherals. If you accidentally spill liquid on the device, disconnect the unit from the power source. Contact your Biomed Department regarding the continued safety of the unit before placing it back in operation.
  • Page 32 HID-1540 User Manual 3. HID-1540 Installation Figure ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ In this chapter, you will learn how to install storage into HID-1540. Please perform these steps with care. ▲ WARNING: Turn OFF the system and disconnect the power cable before performing the following tasks.
  • Page 33 HID-1540 User Manual 3.1 Desktop Stand installation Step1. Position VESA Mount on both sides, matching the holes on the system. Step2. Insert and fasten 4 screws on each side of the monitor to secure Mounting brackets. HID-1540 Quick Reference Guide...
  • Page 34 HID-1540 User Manual 4. Hardware Configuration 4.1 HID-2340 Overviews HID-1540 Quick Reference Guide...
  • Page 35 HID-1540 User Manual 4.2 HID-2340 DB-A Overviews HID-1540 Quick Reference Guide...
  • Page 36 M.2 KEY power select Connectors Label Function Note SODIMM1 262-Pin DDR5 4800MHz SO-DIMM Serial port 1 connector COM1 Serial port 2 connector JCOM1 5 x 2 header, pitch 2.00 mm 2 x 1 wafer, pitch 2.00 mm JSPKR1 Speaker_R HID-1540 Quick Reference Guide...
  • Page 37 JBAT_AUX1 Battery mode connector 4 x 2 header, pitch 2.00 mm JFAUD1 Front Audio connector 6 x 2 header, pitch 2.00 mm USIM1 SIM card slot JPC1 PC connector 6 x 1 wafer, pitch 1.00 mm HID-1540 Quick Reference Guide...
  • Page 38 HID-1540 User Manual 4.5 HID-2340 MB Jumpers & Connectors settings 4.5.1 Clear CMOS (JRTC1) Protect* Clear CMOS *Default 4.5.2 LCD backlight brightness adjustment (JSBKL1) PWM Mode* DC Mode * Default HID-1540 Quick Reference Guide...
  • Page 39 HID-1540 User Manual 4.5.3 AT/ATX auto power on select (JAT1) ATX* * Default 4.5.4 M.2 KEY power select (JP1) +3.3V* +3.8V * Default HID-1540 Quick Reference Guide...
  • Page 40 HID-1540 User Manual 4.5.5 Serial port 1/2 pin9 signal select (JRI1/2) Ring* +12V JRI1 JRI2 * Default 4.5.6 Serial port 1 – RS232/422/485 mode select (JCOM_SEL1) RS-232* RS422/485 * Default HID-1540 Quick Reference Guide...
  • Page 41 MICIN_L LINEOUT1_JD LINE1-JD MIC1_JD 4.5.7.1 Signal Description –Front Audio connector (JFAUD1) Signal Signal Description LINE1-JD AUDIO IN (LINE_RIN/LIN) sense pin MIC1-JD MIC IN (MIC_RIN/LIN) sense pin 4.5.8 On-board header for USB2.0 (JUSB1) Signal USB2_R_DP5 USB2_R_DN5 +5VSB HID-1540 Quick Reference Guide...
  • Page 42 HID-1540 User Manual 4.5.9 On-board header for USB2.0 (JUSB2) Signal +5VSB HUB1_USB1_R_N HUB1_USB1_R_P 4.5.10 On-board header for USB2.0 (JUSB3) Signal +5VSB HUB1_USB3_R_N HUB1_USB3_R_P HID-1540 Quick Reference Guide...
  • Page 43 HID-1540 User Manual 4.5.11 Speaker_R (JSPKR1) Signal SPK_R- SPK_R+ 4.5.12 Speaker_L (JSPKL1) Signal SPK_L- SPK_L+ HID-1540 Quick Reference Guide...
  • Page 44 HID-1540 User Manual 4.5.13 Power connector (PWR1) Signal PIN PIN Signal +VIN_12-24V +VIN_12-24V 4.5.14 Battery connector (BT1) Signal +RTCBATT HID-1540 Quick Reference Guide...
  • Page 45 HID-1540 User Manual 4.5.15 SPI connector (JSPI1) Signal PIN PIN Signal +3.3VSB +3.3VSB SPI0_CS0# SPI0_BIOS_CLK SPI0_BIOS_MISO SPI0_BIOS_MOSI SPI0_HOLD# BIOS_WP# 4.5.16 EC Debug connector (JEC1) Signal EC_SMCLK_DEBUG EC_SMDAT_DEBUG HID-1540 Quick Reference Guide...
  • Page 46 HID-1540 User Manual 4.5.17 LCD Inverter connector (JBKL1) Signal LVDS_BKLADJ LVDS_BKLT_EN +12V 4.5.18 Reading Light connector (JLED_LIGHT) Signal +5VSB READ_LIGHT_EN HID-1540 Quick Reference Guide...
  • Page 47 HID-1540 User Manual 4.5.19 SATA Power connector (SATAPW1) Signal 4.5.20 Front Panel connector (JFPT1) Signal PIN PIN Signal +3.3V BKL_ON_OFF BLK_BRI_UP# READ_LIGHT BLK_BRI_DN# BATTERY_1_O# VOLUME_UP BATTERY_1_B# VOLUME_DN BATTERY_2_O# TOUCH_ON_OFF BATTERY_2_B# EXT_PWRBTN# TOUCH_OFF_LED# PWR_LED- PCH_I2C4_SCL/EC_SMCLK1 PS_ON# PCH_I2C4_SDA/EC_SMDAT1 19 +5VSB HID-1540 Quick Reference Guide...
  • Page 48 HID-1540 User Manual 4.5.21 Serial port 2 connector (JCOM1) Signal PIN PIN Signal COM_DCD#_2 COM_RXD_2 COM_TXD_2 COM_DTR#_2 COM_DSR#_2 COM_RTS#_2 COM_CTS#_2 COM_RI#_2 4.5.22 Touch connector (JTP1) Signal SENSE HID-1540 Quick Reference Guide...
  • Page 49 HID-1540 User Manual 4.5.23 Battery mode connector (JBAT_AUX1) Signal PIN PIN Signal EC_SMCLK5 DB_AC_SENCE EC_SMDAT5 BAT1_PRSNT +3.3VSB BAT2_PRSNT CHARGER_DISABLE 4.5.24 Power Button connector (PWR_BTN1) Signal EXT_PWRBTN# HID-1540 Quick Reference Guide...
  • Page 50 HID-1540 User Manual 4.5.25 LVDS/eDP connector (LVDS1) Signal PIN PIN Signal +12V +12V LVDS_CLK2N LVDS_CLK1N/EPAUXN LVDS_CLK2P LVDS_CLK1P/EPAUXP LVDS_DATAN7 LVDS_DATAN6 LVDS_DATAP7 LVDS_DATAP6 LVDS_DATAN5 LVDS_DATAN4 LVDS_DATAP5 LVDS_DATAP4 LVDS_DATAN3 LVDS_DATAN2/Edpn0 LVDS_DATAP3 LVDS_DATAP2/eDPP0 LVDS_DATAN1/eDPN1 11 LVDS_DATAN0 LVDS_DATAP1/eDPP1 LVDS_DATAP0/eDP_HPD +3.3V +3.3V HID-1540 Quick Reference Guide...
  • Page 51 PCIE_RXN6 Signal PIN PIN Signal PCIE_RXP6 HDMI1_CLKN HDMI1_CLKP CLK_B2B_N5 +12V CLK_B2B_P5 +12V MICIN_R LPC_SERIRQ 46 +5VSB MICIN_L MIC1_JD LPC_LFRAME# 47 +5VSB CLK_24M_CB 48 +5VSB LINEOUT1_JD LINE1-JD LPC_AD0 49 +5VSB LINEOUT_R LINEIN_R LPC_AD1 50 +5VSB LINEOUT_L LNEIN_L HID-1540 Quick Reference Guide...
  • Page 52 HID-1540 User Manual 4.5.27 PC connector (JPC1) Signal VCCCORE_nPMALERT VCCCORE_PMSDA VCCCORE_PMSCL +3.3VSB HID-1540 Quick Reference Guide...
  • Page 53 RJ-45 Ethernet 4.7 HID-2340 DB-A Connectors settings 4.7.1 USB connector 1/2 (JUSB1/2) USB Full Speed* JUSB1 JUSB2 USB Low Speed Note: Low speed: compatible with Keyboard/ mouse. *Default Full speed: compatible with USB drive, Keyboard/ Mouse receiver. HID-1540 Quick Reference Guide...
  • Page 54 HID-1540 User Manual 4.7.2 COM1 in RS-232/422/485 mode (JCOM1_SEL1) RS232* RS485 RS422 *Default 4.7.3 Serial port 2 connector (JCOM1) Signal PIN PIN Signal NTXD1 NRXD1 NDCD1# NDTR1# HID-1540 Quick Reference Guide...
  • Page 55 4.7.4 B2B connector (B2B1) Signal PIN PIN Signal PCIE_RXP_A PCIE_RXN_A PCIE_TXP_A PCIE_TXN_A 62 LAN_RESET#_A LAN_WAKE#_A PLT_RST#_A PS_ON_A USB_DN_A LPC_AD3_A USB_DP_A LPC_AD2_A Signal PIN PIN Signal LPC_AD1_A +5VSB LPC_AD0_A +5VSB LPC_CLK_A +5VSB LPC_FRAME#_A +5VSB LPC_SERIRQ_A +5VSB 72 PCIE_CLKP_A 71 PCIE_CLKN_A HID-1540 Quick Reference Guide...
  • Page 56 6 x 2 wafer, pitch 2.00mm LINOUT1 Line-out audio jack MINI_PCIE1 Mini-PCIe connector USB1 USB connector x 2 JUSB1 USB connector 1 (Reserved) 5 x 2 wafer, pitch 2.00mm JUSB2 USB connector 2 5 x 1 wafer, pitch 2.00mm HID-1540 Quick Reference Guide...
  • Page 57 Signal LINE_L_OUT LINE_R_OUT LINE_L_IN LINE_R_IN MIC_L MIC_R LINEIN_JD LINEOUT_JD MIC_JD 4.9.2.1 Signal Description – Audio connector (JMIC1) Signal Signal Description LINEOUT_JD AUDIO Out(ROUT/LOUT) sense pin MIC_JD MIC IN (MIC_RIN/LIN) sense pin Note: Line in function unavailable. HID-1540 Quick Reference Guide...
  • Page 58 HID-1540 User Manual 4.9.3 Serial port 2 connector (JCOM1) Signal PIN PIN Signal NDCD1# NRXD1 NTXD1 NDTR1# NDSR1# NRTS1# NCTS1# NRI1# 4.9.4 RS-422/RS-485 Termination Resistance connector (JCOMS1) Signal PIN PIN Signal NTXD1 NRXD1 NDCD1 NDTR1# HID-1540 Quick Reference Guide...
  • Page 59 HID-1540 User Manual 4.9.5 USB connector 1 (JUSB1) Signal PIN PIN Signal USB_DP2_WF_R USB_DP1_WF_R USB_DN2_WF_R USB_DN1_WF_R USBVCC1 USBVCC1 4.9.6 USB connector 2 (JUSB2) Signal USB_DP_R_3 USB_DN_R_3 USBVCC2 HID-1540 Quick Reference Guide...
  • Page 60 You want to remove/install any parts Thermal The HID-1540 is a fanless design system, heat is dispatch through rear metal heatsink which is located at VESA mount area.. When using your HID-1540 systems, it is normal for the metal heatsink to get warm. The rear metal heatsink of the HID-1540 functions as a cooling surface that transfers heat from inside the computer to the cooler air outside.
  • Page 61 Handle your HID-1540 with care. It is made of metal, glass, and plastic and has sensitive electronic components inside. Don't use a damaged HID-1540, such as one with a cracked screen, as it may cause injury. Setup HID-1540 on a stable work surface.