VEVOR MS36127CE Instructions Manual
  1. Manuals
  2. Brands
  3. VEVOR Manuals
  4. Drill
  5. MS36127CE
  6. Instructions manual
VEVOR MS36127CE Instructions Manual

VEVOR MS36127CE Instructions Manual

Hollow chisel mortise machine
Hide thumbs

Advertisement

Table of Contents

Technical Support and E-Warranty Certificate
www.vevor.com/support
HOLLOW CHISEL MORTISE MACHINE
INSTRUCTIONS
MODEL: MS36127CE
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS36127CE and is the answer not in the manual?

Questions and answers

Related Manuals for VEVOR MS36127CE

Summary of Contents for VEVOR MS36127CE

  • Page 1 HOLLOW CHISEL MORTISE MACHINE INSTRUCTIONS MODEL: MS36127CE We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

  • Page 3: General Safety Rules

    Warning-To reduce the risk of injury, user must read instructions manual carefully. GENERAL SAFETY RULES Woodworking can be dangerous if safe and properly operating procedures are not followed. As with all machinery, there are certain hazards involved with the operation of the product. Using the machine with respect and caution will considerably lessen the possibility of personal injury.
  • Page 4 4.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it “on”. 5.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents. 6.DO NOT USE IN DANGEROUS ENVIRONMENT. Do not use power tools in damp or wet locations, or expose them to rain.
  • Page 5 properly and perform its intended function – check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.
  • Page 6 ADDITIONAL SAFETY RULES FOR HOLLOW CHISEL MORTISERS 1. DO NOT OPERATE THIS MACHINE until it is assembled and installed according to the instructions. 2. OBTAIN ADVICE FROM YOUR SUPERVISOR, instructor, or another qualified person if you are not familiar with the operation of this machine. 3.
  • Page 7 result in the risk of injuries. 20. TURN THE MACHINE “OFF” AND DISCONNECT THE MACHINE from the power source before installing or removing accessories, before adjusting or changing set-ups, or when making repairs. 21. TURN THE MACHINE “OFF”, disconnect the machine from the power source, and clean the table/work area before leaving the machine.
  • Page 8 GROUNDING INSTRUCTIONS WARNING: THIS TOOL MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRIC SHOCK. All grounded, cord-connected tools: 1. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug.

  • Page 9: Unpacking And Cleaning

    INSTRUCTIONS FOR OPERATING THE DEVICE FOREWORD. The Fox MS36127CE is easier to handle than traditional drilling machines equipped with mortise attachments. Model MS3816R is made of cast iron and steel, which is rigid and stable. The mortise is equipped with a standard 3-jaw key chuck for positive gripping of the tenon.
  • Page 10 WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION MANUAL. Lifting handle and gas spring.  Raise mortising machine head (E) Fig. 2, to the up position by turning handle (A) clockwise.

  • Page 11: Depth Stop

    DEPTH STOP.  A depth stop guide (A) Fig. 5, is provided to limit the depth of the chisel (B). To adjust the depth stop guide (A), loosen screw (C) and lower head until the chisel (B) is at the desired depth. Lower depth stop guide (A) until it is at the desired depth , tighten screw (C).

  • Page 12: Maintenance

    2. Insert chisel bushing (with the hole facing forward) into the head. Tighten the screw just enough to hold the chisel in place. NOTE: Set the slot in the side of the chisel to the left or right, NOT to the front or back.
  • Page 13 Fig 7 Sharpen the chisel with a mortise and tenon chisel with the correct size guide. (Pilot size will vary depending on the size of the chisel). Two to three turns of the cutter in the carpenter's bracket chuck are enough to sharpen the chisel, as shown in Figure 8.
  • Page 14 Use a small, triangular, smooth file to relieve the inner corners of the chisel. See Fig.9.Remove any burrs from the outside of the chisel with a fine oilstone. Fig 9 - 13 -...

  • Page 15: Parts Drawings And Parts Lists

    PARTS DRAWINGS AND PARTS LISTS Parts Diagram - 14 -...

  • Page 16: Part List

    PART LIST DESCRIPTION DESCRIPTION BOLT WASHER 10 LOCK WASHER SET SCREW M6x20 BASE GEAR SHAFT BRACKET A HANDLE HEX KEY SCREW SCREW M10x25 WOOD BASE MOTOR SCREW M8x25 SWITCH HOLD DOWN CLAMP POWER CORD FENCE SWITCH BOX WASHER WARNING PLATE BRACKET B KNOB INNER SPRING...

  • Page 17: Wiring Diagram

    WIRING DIAGRAM This service instruction contains except general information about the type MS36127 and also a list of the equipment delivered on request. The showed rating plate is placed on the Head stock. ACCESSORIES LIST 1.Instructions *1 11.Tool holder screws M6*16 + spacers *2 2.1/4 chisel *1 12.Aluminum briquettes *1...
  • Page 18 - 17 -...
  • Page 19 Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai EC REP: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany Tel: +49 1727041930 euvertreter@gmail.com UK REP: Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom Tel: 01772418127 pooledas123@gmail.com Imported to AUS: SIHAO PTY LTD.
  • Page 20 Technical Support and E-Warranty Certificate www.vevor.com/support...

Table of Contents