Tech Source RAPTOR 1000 - OPENWINDOWS FOR SOLARIS INSTALLATION-REFERENCE Installation And Reference Manual page 49

NOTE: Please refer to Appendix B for a description of nvedit
commands.
For example, to set the console resolution to 1280x1024x76,
type the following:
ok nvedit
0: : video-timing " 1280, 384, 32, 64,
1024, 43, 3, 8, 135000000, 0" ;
1: <ctrl-c>
ok nvstore
ok setenv use-nvramrc? true
ok reset
NOTE: The syntax is very important.
present exactly as they appear in the example.
NOTE: The last three commands enable the NVRAM. Without
these lines, the changes you make with nvedit will be ignored.
The following is a brief description of the 10 parameters used in
this method.
horizontal resolution (in pixels)
horizontal blanking total
horizontal front porch
horizontal sync width
vertical resolution (in lines)
vertical blanking total
vertical front porch
vertical sync width
dot clock in Hz
sync value:
0 separate sync
256 sync on green
512 positive vertical sync pulse
1024 positive horizontal sync pulse
2048 composite sync
Appendix A - Changing the Console Resolution
The spaces must be
A-5