Setting Bit-Depth On I-Class Cards; Setting Bit-Depth On T-Class Cards; Mox Modes - Tech Source RAPTOR 1000 - OPENWINDOWS FOR SOLARIS INSTALLATION-REFERENCE Installation And Reference Manual

5.3

Setting Bit-Depth on I-Class Cards

I-Class cards support 8-bit mox16 and mox24 modes. By default
X windows comes up in 8-bit mode on these cards. The bit-depth
can be selected by using the raptorconfig utility (see Section
3.4.3.)
For an explanation of the various MOX modes, please see
Section 5.5.
5.4

Setting Bit-Depth on T-Class Cards

Raptor 1100T, 2100T, 2500T and Raptor 2500T-DL cards support
8-bit, 24-bit, 8+8-bit, 8+24-bit, mox16, mox24 and mox32 modes.
By default X Windows comes up in 8-bit mode on these cards.
The bit-depth can be selected by using the trzconfig utility
(see Section 4.5.)
For an explanation of the various MOX modes, please see
Section 5.5.
5.5

MOX Modes

The following MOX modes apply to all Raptor cards:
MOX, 8-bit Normal, 13-bit Group, 5-bit Absolute
mox16
MOX, 8-bit Normal, 21-bit Group, 13-bit Absolute
mox24
The following MOX mode applies to the Raptor 1100T, 2100T and
2500T cards:
MOX, 8-BIT Normal, 32-bit Group, 24-bit Absolute
mox32
NOTE: Details of the MOX extension to X Server are in a
separate technical white paper.. This may be obtained from
Tech Source.
Chapter 5 – OpenWindows
5-3