Openwindows; Overview; Raptor As The Console; Raptor As The Secondary Framebuffer - Tech Source RAPTOR 1000 - OPENWINDOWS FOR SOLARIS INSTALLATION-REFERENCE Installation And Reference Manual

5.1

Overview

This section describes how to start up OpenWindows on the
Raptor cards. The examples in this chapter use raptor0 as the
device name but the device name of your card may be different.
The following table lists the different Raptor cards and their
corresponding device names. The device name will have the
card's instance number appended to it. For example, the first
instance of a Raptor 2000 will have a device name of raptor0.
Raptor Card
1000
2000
2500
1100T
2100T
2500T
2500T-DL

5.1.1 Raptor as the Console

If the Raptor is the console, type:
prompt# openwin

5.1.2 Raptor as the Secondary Framebuffer

If the PGX (Sun Microsystem's on board video card) card is the
console and the Raptor is the second card, to start OpenWindows
on both cards, in multi-screen mode, type:
Chapter 5

OPENWINDOWS

Device Name
raptor
raptor
rapqfp
rap1kt
rap2kt
raptfp
raptfp
5-1