Interactive Configuration - Tech Source RAPTOR 1000 - OPENWINDOWS FOR SOLARIS INSTALLATION-REFERENCE Installation And Reference Manual

Chapter 4 – Software Installation for T-Class Cards
Raptor cards support the following bit-depths:
8-bit PsuedoColor
8
Simultaneous 8-bit PsuedoColor and 24-bit
8+24
True Color
24-bit True Color
24
Two 8-bit PseudoColor visuals
8+8
MOX, 8-bit Normal, 13-bit Group, 5-bit
mox16
Absolute
MOX, 8-bit Normal, 21-bit Group, 13-bit
mox24
Absolute
MOX, 8-bit Normal, 24-bit Group, 21-bit
mox32
Absolute
The next section describes how to use trzconfig to configure
the Raptor card.

4.5.1 Interactive Configuration

The trzconfig utility has an interactive menu-style interface
(See Figure 4.1). To use this program to configure your Raptor
card, type:
prompt# trzconfig
NOTE: If X Windows is running on the Raptor card(s) to be
configured, please exit out of it before running trzconfig.
Failure to do so could result in a corrupted screen for the
remainder of the X Window session.
The Raptor device(s) will be listed in the left column of the
configuration screen displayed by trzconfig. (See Figure
4.1).
4-5