CREALITY BOX 2.0 Manual

Parts list

Parts list

• CREALITY BOX 2.0 x 1
• Certificate of approval x 1
• USB cable x 2
• TF card x 1
• Converter x 1
• User manual x 1

Machine introduction

CREALITY BOX 2.0

1. RJ45 network port
2. Connect printer/camera
3. Micro USB power interface
4. TF card connector
5. Reset button
6. Yellow light:
   WIFI working status
7. Blue light:
   Ethernet indicator
8. Green light:
   Cloud/distribution network indicator
9. Red indicator:
   TF card indicator

Assembly procedure

1. lnsert the TF card (FAT32/exFAT format) into the TF card connector of the box.
   
   TIPS
   1. The product is working when the yellow indicator flashes.
   2. The connection is successful when the green indicator flashes, but it is failed when the indicator keeps on.
   3. The TF card is not inserted when the red indicator keeps

2. Connect the MINI/ Micro USB port of printer and the USB1/USB2 port of the box with the USB cable equipped with the printer, and turn on.
   
3. Ensure the connection successful between the port "5V/2.4A" of product and the power supply by the USB cable and turn on, and networking either Ethernet or Wireless.
   
   Note: The output is 5V/2.4A for the power supply. Please press and hold the reset button for more than 5s until default settings are restored, then reconnect to network through the APP "Creative Cloud"

Download Creality Cloud APP

Download the APP "Creative Cloud" by app store or scanning the QR code on the packing box, register and log in, click the "Add Device" and "Bluetooth Networking", or Scan Code to Add" to select your device.

1. Scan and download
   
2. Register
   
3. Log in
   
4. Add device
   

Network Configuration

Method 1: Click "Add Device" → "Bluetooth Network Configuration" to select your device

1. Select bluetooth
   
2. Add device
   
3. Connect to the external WIFI
   

Method 2: Click "Add Device" → "Scan Code to Add" to select your device

1. Scan QR Code
   
2. Network settings
   
3. Connect to device WIFI
   
4. Connect to the external WIFI
   

Model Printing

Select model, printer, device to print through the APP after connection and online The user interfaces are for reference only and are subject to change.

1. Select model
   
2. Select Printer
   
3. Printing
   
4. Start printing
   

The user interfaces are for reference only and are subject to change.

Official Website:
www.creality.com

Tel: +86 755—8523 4565

E-mail:
info@creality.com
cs@creality.com

Documents / Resources

References

• Creality - Official Website

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download CREALITY BOX 2.0 Manual