Siemens SIMATIC NET RUGGEDCOM RS940G Equipment Manual page 43

Certification
6.1.9 RoHS
A copy of the Declaration of Conformity is available via Siemens Industry Online
Support at https://support.industry.siemens.com/cs/ww/en/view/89855782.
6.1.9 RoHS
This device is declared by Siemens Canada Ltd. to meet the requirements of the
following RoHS (Restriction of Hazardous Substances) directives for the restricted use
of certain hazardous substances in electrical and electronic equipment:
•
•
Declarations of conformity for each directive are available online via
Industry Online Support
6.2 EMC and Environmental Type Tests
The RUGGEDCOM RS940G has passed the following EMC and environmental tests.
IEC 61850-3 Type Tests
61000-4-2
61000-4-3
61000-4-4
61000-4-5
34
EU RoHS Directives (EU) 2011/65 and (EU) 2015/863
European Directive for Restriction of Hazardous Substances
China RoHS (relating to SJ/T 11364)
Management Methods for the Restriction of the Use of Hazardous Substances in
Electrical and Electronic Products
[https://support.industry.siemens.com/]>.
Test
IEC ESD
IEC Radiated RFI
IEC Burst (Fast Transient)
IEC Surge
Description
Enclosure
Contact
Enclosure Air
Enclosure
Ports
Signal Ports
DC Power
Ports
AC Power
Ports
Earth
ground Ports
Signal Ports
Siemens
Test Levels
± 8 kV
± 15 kV
20 V/m
± 4 kV @ 2.5 kHz
± 4 kV
± 4 kV
± 4 kV
± 4 kV line-to-earth,
± 2 kV line-to-line
RUGGEDCOM RS940G
Equipment Manual, 10/2023, C79000-G8976-1036-09
Severity
Levels
4
4
x
x
4
4
4
4