Siemens SIMATIC NET RUGGEDCOM RS940G Equipment Manual page 36

1000 SX MM
1000 FX SM
1000 FX SM
1000 FX SM
1000 FX SM
a
All cabling is duplex type unless specified otherwise.
b
Typical.
c
All optical power numbers are listed as dBm averages.
d
Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens
sales associates when determining maximum segment distances.
5.7 Operating Environment
The RUGGEDCOM RS940G is rated to operate under the following environmental
conditions.
Ambient Operating
Temperature
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
b
Operating temperature may vary based on the limitations of installed SFPs. Refer to the "RUGGEDCOM SFP Transceivers Catalog" for
SFP temperature ratings.
c
Non-condensing.
5.8 Mechanical Specifications
Weight
Ingress Protection
Enclosure
RUGGEDCOM RS940G
Equipment Manual, 10/2023, C79000-G8976-1036-09
LC 50/125 850
62.5/125
SC 9/125 1310
LC 9/125 1310
SC 9/125 1310
LC 9/125 1310
-40 to 85 °C (-40 to 185 °F)
ab
-40 to 85 °C (-40 to 185 °F)
c
5% to 95%
2000 m (6562 ft)
1.2 kg (2.7 lbs)
IP30
20 AWG Galvanized Steel
5.7 Operating Environment
Min Max
-9 -2.5 -20
-10 -3 -20
-9.5 -3 -21
-5 0 -20
-7 -3 -24
Technical Specifications
0 0.5 11
-3 10 10
-3 10 11.5
-3 25 15
-3 25 17
27