Use After Storage - EcoFlow Smart Generator 3000 Dual Fuel Manual

7.4 Use after Storage

If the generator is stored with fuel in the fuel tank and carburetor, conduct
servicing as required in the table below before using it again.
Storage
Recommended Servicing Procedure to Prevent Difficult Startups
Duration
Within 1
No preparation needed
month
1 to 2
Evacuate the fuel and inject fresh fuel
months
2
1. Evacuate the fuel and inject fresh fuel
months
2. Drain the fuel from the Carburetor Drain Cup
to 1
3. Drain the fuel from the fuel strainer
year
1. Evacuate the fuel and inject fresh fuel
Over 1
2. Drain the fuel from the Carburetor Drain Cup
year
3. Drain the fuel from the fuel strainer
† Loosen and remove the oil drain bolt and drain all the fuel out of the
carburetor. Drain the fuel into a suitable container, and screw in and
tighten the oil drain bolt.
‡ After turning off the Engine Switch, remove the fuel strainer, empty
the gasoline, reinstall the fuel strainer, and tighten it.
7.5 Transportation
When moving, storing, or operating the generator, do not place it on its
side. Engine oil may leak and damage the engine or your property.
If the generator needs to be transported after running, shut it down and
allow it to cool before loading it onto the vehicle. Hot engines and exhaust
†
‡
†
‡