Page 2
Once you use this product, it is deemed that you understand, approve and accept all the terms and content in this document. EcoFlow is not liable for any loss caused by the user's failure to use this product in compliance with this user manual.
Safety Instructions EcoFlow App What's in the Box Product Details Overview LCD screen Power On/Off Charge Your Devices Charge DELTA 2 AC Charging Solar Charging Car Outlet Charging Smart Extra Battery Smart Generator X-Boost and EPS X-Boost Storage and Maintenance Troubleshooting FCC Warning &...
Specifications General Info Net Weight Approximately 12 kg (27 lbs) Dimensions 400 × 211 × 281 mm (15.7 × 8.3 × 11.1 in) Capacity 1,024Wh, 51.2V Frequency Range: 2412-2462MHz/2422-2452MHz Wi-Fi Maximum Output Power: 0.071W (US); 0.177W (Ca) Frequency Range: 2,402-2,480MHz Bluetooth Maximum Output Power: 0.005W (US);...
5. Avoid using wires or metal objects that may result in a short circuit. 6. Do not use unofficial components or accessories. If you need to replace any components or accessories, please visit official EcoFlow channels to check relevant information. 7. When using the product, please strictly follow the operating temperatures specified in this user manual.
Page 6
Please take anti-electric shock measures before touching the product. Following this, place the product in a safe, waterproof and open area. Once complete contact EcoFlow Customer Service immediately. 17. This product is not recommended for powering medical emergency equipment related to personal...
EcoFlow App Control, monitor and customize your EcoFlow DELTA 2 from afar with the EcoFlow App. Download here: https://download.ecoflow.com/app Privacy policy By using EcoFlow Products, Applications and Services, you consent to the EcoFlow Term of Use and Privacy Policy, which you can access via the “About”...
LCD Screen 1. Remaining battery percentage 9. Low temperature warning 2. Battery level indicator 10. Fan indicator 3. Remaining charging/discharging 11. Input power time 12. Output power 4. Extra battery indicator 13. Overload warning 5. AC output 14. State of charge 6.
Power On/Off Press the main power button once to turn on the product, then the LCD screen lights up and the battery level indicator icon shows up; press and hold the main power button for at least 3 seconds to turn off the product. 1.
EcoFlow’s X-Stream fast charging technology is specifically designed for AC charging. The AC charging speed can be adjusted via the EcoFlow app. In case of unusual situations where the AC input current remains higher than 20A, the X-Stream charging input port will initiate a self-protection function, and the Overload Protection Switch on the product will automatically pop up.
To avoid failure to start due to insufficient car battery, use the car charger after the vehicle is started. In addition, please make sure that the cigarette lighter of the Car Outlet and the Car Charger Input Cable are in good condition. EcoFlow takes no responsibilities for any losses or damages caused by failures to follow instructions.
Smart Extra Battery A single DELTA 2 can connect up to 1 Smart Extra Battery for additional capacity. Refer to the user manuals of the DELTA 2 Smart Extra Battery and Smart Generator for detailed instructions. 1. Turn off both the Smart Extra Battery a n d D E LTA 2 b e fo re co n n e c t i n g o r disconnecting them.
1. X-Boost is not available when the AC output is turned on in a recharging state (in bypass mode). 2. X-Boost is enabled by default. You can adjust it in the EcoFlow App. 3. X-Boost is not available for all electrical appliances; it’s incompatible with appliances with strict voltage requirements.
1. What battery does the product use? High-quality LFP battery. 2. What devices can the product’s AC output port power? With high rated power and peak power, the product’s AC output port can power most household appliances. Before you use it, we recommend that you confirm the power of the appliances first and ensure the power sum of all loaded appliances is lower than the rated power.
If the Alarm Prompt shows on the product LCD screen during use and does not disappear after a restart, please stop using it immediately (do not try to charge or discharge). If you require any other assitance, please contact EcoFlow Customer Service.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.