Storage And Transportation; Draining The Fuel - EcoFlow Smart Generator 3000 Dual Fuel Manual

4. Inspect the muffler block and spark plug arrestor for any damage, and

replace them if necessary.

5. Reinstall the parts in turn.

6.3.7 Replacing the Internal Battery

If you find that the internal battery is no longer functioning, please contact our

Customer Service to obtain a new one. The cost of replacement will vary

based on your warranty status. Once you have received the new battery, follow

these steps to replace the old one:

1. Use the screwdriver (Slotted-head) provided in the package to unscrew the

maintenance cover, and then remove the cover.

2. Disconnect both the positive and negative wires from the old battery.

3. Release the strap to

4. Carefully remove the old battery and insert the new one.

5. Fasten the strap back to secure the battery.

6. Reconnect the positive and negative wires of the new battery.

7. Storage and Transportation

If you plan to place this generator into long-term storage, take some storage

measures to prevent premature aging of the generator.

1. Turn the Engine Switch to "OFF".

Note: If there's no leftover fuel, skip this step and ensure the LPG inlet is

Table of Contents

Do you have a question about the Smart Generator 3000 Dual Fuel and is the answer not in the manual?