Runco Video Xtreme VX-2cx User Manual page 26

Controls and Functions
1. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2. ON / OFF
Press to turn the projector on or off.
3. ENTER
Press to select a highlighted menu item or confirm a changed setting.
4. Cursor Buttons ( ,
Use these buttons to select items or settings, adjust settings or switch display
patterns.
When no menu is present on-screen, the UP and DOWN buttons toggle through the
available aspect ratios, in this order:
UP Button = Anamorphic - Standard (4:3) - Letterbox - VirtualWide - Cinema -
Virtualwide 2.35
DOWN Button = Virtualwide 2.35 - Cinema - VirtualWide - Letterbox - Standard (4:3)
- Anamorphic
Virtualwide 2.35 is available only on CineWide-equipped projectors.
Note
For more information about aspect ratios, refer to Table 4-1.
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in
this order:
LEFT Button = DVI 2 - DVI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 -
S-Video 1 - Composite
RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 -
HD/RGB 2 - DVI 1 - DVI 2
5. LIGHT
Press to illuminate the buttons. (Not available on all models.)
6. MENU
Press this button to access the OSD controls, or to exit the current menu and return
to the previous one.
7. VIDEO (1)
Press to select Composite video input as the source or to enter the numeric
character "1."
8. COMP (Component) (2)
Press to select Component SD (480i/576i) video input as the source or to enter the
numeric character "2."
, , )
14 Runco VX-2cx/VX-2dcx Owner's Operating Manual