Mounting The Vx-2; Floor Mounting (Upright); Ceiling Mounting (Inverted); Adjusting The Projection Angle - Runco Video Xtreme VX-2cx User Manual

Installation
3.5

Mounting the VX-2

Floor Mounting (Upright)

Ceiling Mounting
(Inverted)
Adjusting the Projection
Angle
There are several methods for mounting the projector. Depending on your chosen
installation, one method may be more suitable than another.
➤
In typical front and rear screen installations, the projector can be mounted to a secure and
level surface such as a table or cart. Carts are useful when moving a projector during a
presentation or from site to site. If possible, lock the wheels when it's in position to prevent
it from being moved during a presentation.
➤
For fixed installations, and for those that want the projector out of sight or have a limited
space for projector and audience, you can invert the VX-2 and suspend it from the ceiling
using a specially-designed ceiling mount fixture.
Note
The projector can also be inverted and placed in an enclosure above and behind the
viewing area. Install four feet on the inside bottom surface of the enclosure on which the
projector can rest. A variety of materials can be used for this purpose (for example, rubber
crutch tips or turntable feet).
➤
If the VX-2 is ceiling-mounted and the screen is significantly lower than the projector, you
can tilt the projector at a slight angle by adjusting the ceiling mount.
If you do this, you may need to shift the image using the on-screen display (OSD) controls,
to compensate. For detailed instructions, refer to Using the On-Screen Menus on
page 45.
Use only the Runco-approved ceiling mount kit designed for your
projector. Install the mount kit according to the instructions
provided with it.
28 Runco VX-2cx/VX-2dcx Owner's Operating Manual