Ricoh Aficio 2045e General Settings Manual page 238

Setting Up the Machine on a Network
❖ ❖ ❖ ❖ WEP (Encryption) Setting
Specifies the encryption of the
IEEE 802.11b (wireless LAN). If
this is set to [Active], you must en-
ter the WEP key.
• WEP
• Active
• Inactive
• Encryption
3
Note
❒ Default: Inactive
❖ ❖ ❖ ❖ Wireless LAN Signal
Shows the radio wave conditions
of the access point connected in in-
frastructure mode.
Note
❒ Radio wave status is displayed
when you press [Wireless LAN
Signal].
❖ ❖ ❖ ❖ Transmission Speed
Specifies the communication
speed of the IEEE 802.11b (wireless
LAN).
• Auto
• 11Mbps Fixed
• 5.5Mbps Fixed
• 2Mbps Fixed
• 1Mbps Fixed
Note
❒ Default: Auto
❖ ❖ ❖ ❖ Return to Defaults
You can return the IEEE 802.11b
(wireless LAN) settings to their de-
faults.
• No
• Yes
38
Interface Settings/Print List
You can check items related to the
network in use.
Reference
For details about printing, see p.44
"Printing the Interface Settings".
File Transfer
❖ ❖ ❖ ❖ Delivery Option
Enables or disables sending stored
or scanned documents via the
ScanRouter V2 Professional/Lite
delivery server.
• ON
• Main Delivery Sever
• Sub Delivery Sever
• OFF
Note
❒ Default: OFF
❒ Set this option when specifying
whether or not to use ScanRout-
er V2 Professional/Lite. If you
do, you will have to re-register
I/O devices in ScanRouter V2
Professional/Lite.
❖ ❖ ❖ ❖ Fax RX File Transmission
• Setting per Line
Specifies whether or not re-
ceived fax documents are sent
to ScanRouter V2 Professional
for each fax line.
• Line 1:Deliver to Server/Do
not Deliver
• Line 2:Deliver to Server/Do
not Deliver
• Line 3:Deliver to Server/Do
not Deliver
• E-mail:Deliver to Server/Do
not Deliver