Ricoh Aficio SP C320DN Hardware Manual page 72

4. Connecting the Printer
Connecting to the standard Ethernet port
1. Remove the cable cover.
4
2. Connect the Ethernet cable to the Ethernet port.
3. Connect the other end of the cable to the network, for example using a hub.
4. Attach the cable cover.
Connecting to the Ethernet port of the Gigabit Ethernet board
1. Attach the ferrite core to the Ethernet cable.
Attach the other ferrite core about 10 cm (4 inches) ( ) from this core making a loop as shown.
70
CBK233
CBK088
CBK234