Replacing The Friction Pad - Ricoh Aficio SP C400DN Hardware Manual

Replacing Consumables and Maintenance Kit

Replacing the Friction Pad

Replace all the friction pads in the tray. The following procedure shows how to
replace the tray's friction pad (Tray 1).
A
Carefully slide the paper tray (Tray 1) out, until it stops. Then, lift the front
slightly, and then pull the tray completely out.
B
Remove paper from the paper tray. Place the tray upside down on a flat sur-
face.
6
C
Use a pointed implement such as a ball-point pen, to carefully press down
the two catches securing the friction pad.
The friction pad may fall away when released. Place your hand over the fric-
tion pad while pressing the catches.
The friction pad spring may come loose. Be careful not to lose the friction pad.
126
AET041S
AET202S
ZKEM170E