Paper and Other Media
Thick Paper
Paper thickness
Printer setup
Printer driver setup
Enabled paper feeding tray Any input tray can be used.
5
Duplex printing
Additional cautions
Thin Paper
Paper thickness
Printer setup
Printer driver setup
Enabled paper feeding tray Any input tray can be used.
Duplex printing
84
• [Thick Paper]: 104.7 - 216 g/m
• [Thick Paper 1]: 104.7 - 157 g/m
• [Thick Paper 2]: 157 - 216 g/m
Make the following settings using the control panel:
• Press the {Menu} key, select [Paper Input] , and then select one
from [Thick Paper], [Thick Paper 1] or [Thick Paper 2] for the select-
ed tray's paper type.
Click [Thick 1] or [Thick 2] in the [Paper type:] list.
Note
❒ Make sure paper is not stacked higher than the upper limit
mark (T) inside the tray. Make sure paper is not stacked higher
than the paper guides inside the bypass tray.
• [Thick Paper 1]: Possible
• [Thick Paper 2]: Not possible
• [Thick Paper]: Depends on the paper thickness
• Print speed is slightly slower than when using plain paper.
• When printing on the reverse side of thick paper that is already
printed on, select [Thick 1: Dup.Back] or [Thick 2: Dup.Back] from
[Paper Type:] using the control panel or printer driver.
2
52 - 60.2 g/m
(14 - 16 lb.)
Make the following settings using the control panel:
• Press the {Menu} key, select [Paper Input], and then select [Thin
Paper] for the selected tray's paper type.
Click [Thin] in the [Paper type:] list.
Note
❒ Make sure paper is not stacked higher than the upper limit
mark (T) inside the tray. Make sure paper is not stacked higher
than the paper guides inside the bypass tray.
Not possible
2
(28 - 58 lb.)
2
(28 - 42 lb.)
2
(42 - 58 lb.)