Ieee 802.11B (Wireless Lan) Configuration - Ricoh Aficio SP C400DN Hardware Manual

Configuration

IEEE 802.11b (Wireless LAN) Configuration

Configure the printer to use IEEE 802.11b (Wireless LAN). The following table
shows the control panel settings and their default values. These items appear in
the [Host Interface] menu.
Communication Mode
Channel
Communication Speed
4
SSID
WEP
Note
❒ To use IEEE 802.11b (Wireless LAN), select [IEEE 802.11b] for [LAN Type] in [Net-
work] in the [Host Interface] menu, and then set the IP Address, Subnet Mask,
Gateway Address, DHCP, Network Frame Type, and Effective Protocol un-
der [Network]. For details about setting items under "Configuring the Printer
for the Network", see Software Guide.
❒ The 802.11b interface unit cannot be used simultaneously with a standard
ethernet interface.
A
Press the {Menu} key.
B
Select [Host Interface] using {T} or {U}, and then press the {OK} key.
72
Setting Name
K C M
802.11 Ad hoc
• Inch version
(1-11) 11
• Metric version
(1-13) 13
Auto
blank
Off
Y
AQC001S
Default Value