SMC Networks IP5000 Operation Manual page 20

■Air supply
(1) Use dehumidified and dust-removed clean air as the supplying air source.
(2) Positioner has fine paths in it. Therefore, please use clean air which is dehydrated and
filtered, and also avoid employing Lubricator which causes malfunction. In addition, it is
recommended to use a mist separator as an air-cleaning equipment.
(3) Avoid using compressed air compressed air containing chemicals, synthetic fluid
including organic solvent, salinity, and corrosive gas as it may cause malfunction.
(4) If atmosphere is below freezing point, take measure to avoid condensation.
■Environment
(1) Do not use in an environment where the product is exposed to corrosive gas, chemicals, salt
water, water or steam.
(2) Do not operate the product in a location where it is subject to strong vibration and/or shock.
(3) If the positioner is used under temperature outside of the specification, the sealing
materials deteriorate quicker and also the positioner may not operate normally.
Warning
!
Warning
!
- 20 -