Printronix P5000 Quick Reference Manual page 41

A
B
C
7.
Lower the forms thickness lever. Set it to match the paper thickness.
The A-B-C scale corresponds approximately to 1-, 3-, and 6-part paper
thickness. Adjust until you have the desired print quality.
Caution
Do not set the forms thickness lever too tightly; excessive friction can
cause paper jams, ribbon jams with potential for ribbon damage,
smeared ink, or wavy print.
8.
Press CLEAR to clear the fault condition.
9.
Press SET TOF. The paper moves down to the print position and
aligns to the top-of-form.
If there is any data in the input buffer, the paper moves to the same
relative position on the new page corresponding to the last print
position. The new top-of-form setting is retained in the printer memory.
10.
Press ON LINE and close the printer cover.
Thin Paper
Medium Paper
Thick Paper
Setting Top-Of-Form
41