Current Setting - ToolKitRC M6AC Manual

===================================
1. Only LiPo, LiHV, LiFe batteries can set the cut-off
voltage.
2. Do not modify the cut-off voltage if you are not
familiar with the battery characteristics.
3. The charging cut-off voltage can be set to a range of
plus or minus 50mV of full voltage.
4. Nomenclature:
TVC: English abbreviation for terminal voltage control
=================================================

7. Current setting

Move the cursor to the [Charge Current] or [DisCHG
Current] position, and press [●button] to modify the
current. Press [▲▼button] to adjust the value, step by
0.1A. Press [▲▼button] quickly to increase or decrease.
The charger supports up to 15.0A.
16
@T oolkiRC 2024