Num'axes PROTECTION PIE1076 User Manual page 25

− Press the
− Press the  and  buttons to browse the recorded photo/video files.
− Press the DEL button (Delete). Select "Delete current file" or "Delete all files"
then press OK.
− Select "Cancel" or "OK" then press OK.
− Press the
5.6. Transfer photos/videos to a computer
To upload photos/videos on a computer, connect the supplied USB cable to the
camera's USB Type-C port and then directly to a main USB port on your computer
(camera switch in the OFF, SETUP or ON position).
WARNING: Do not disconnect the USB cable or remove the memory card while
copying photos/videos. You could lose files.
6. Setting up the camera
− Mount the camera facing north or south, not east or west as the rising and setting
of the sun could produce false triggers and overexposed images.
− If you're covering a trail, face the camera down or up the trail.
− Clear out any brush or weeds in front of the camera. These can cause false
triggers due to temperature and motions disturbances in front of the camera
(especially in windy days).
− Check the power level of the batteries.
− Make sure the memory card is properly inserted and have sufficient available
space.
− Verify time and date are correct.
− Make sure to turn the camera ON (switch in the ON position).
7. Technical specifications
Image sensor
Infrared flash setting
Infrared flash range
Memory
button to enter the replay function
button to exit.
3 Mega Pixels Colour CMOS
34 invisible IR LED | Wavelength: 940 nm
Approx. 20 m (65.6 ft.)
Micro SD card up to 512GB maximum
Class 10 minimum
Guide PIE1076 – Septembre 2024 – ind. B - 25/88