Num'axes PROTECTION PIE1076 User Manual page 21

Press OK to save the selected setting.
Press the MENU button to go back to the previous page.
Settings
Mode
Programmable options
(default settings in bold characters)
Motion detection | Time-lapse | Time-lapse + Video
‒ Motion detection
Select "Motion detection" then press OK to set the
desired time interval between photos/videos upon
motion. This option avoids camera taking to many photos
or videos.
Default PIR interval: 20 seconds
Programmable from 05 seconds up to 01 hour
Example: if the PIR interval is set to '01 minute', the
camera will wait 1 minute between photo/video
recordings with motion.
‒ Time-lapse
In Time-lapse mode, the camera will capture photos or
videos automatically at a pre-set time interval.
WARNING: in Time-lapse mode, the PIR sensor is
deactivated (there is no motion detection).
Capture interval programmable from 00 : 00 : 05 up to
23:59:59.
Example: if capture interval is set to 00 : 30 : 00, the
camera will automatically capture photos or videos every
30 minutes.
‒ Time-lapse + Video
In Time-lapse + Video mode, the camera will capture
photos automatically at a pre-set time interval then
generate a video from these photos.
WARNING: in Time-lapse mode, the PIR sensor is
deactivated (there is no motion detection).
Capture interval programmable from 00 : 00 : 05 up to
23:59:59.
Example: if capture interval is set to 00 : 30 : 00, the
camera will automatically capture photos every
30 minutes.
Guide PIE1076 – Septembre 2024 – ind. B - 21/88