6. The updating process will take as long as a minute. During this time, several messages will
appear in the Update FaxFinder N.N.N.N window. A transient TFTP screen may appear briefly. If
the updating process has been successful, the final message line will say "Finished – The
FaxFinder is ready." If you chose to update all modems with a single command, it will take about
the same length of time for each modem to be updated.
7. If you are updating the modems one-by-one, repeat steps 1-6 for each modem of the unit.
For consistency of operation, update all POTS modems of all FaxFinder units in the system.
8. The updating process is now complete. Click the "X" in the upper-right corner to return to the main
Device Manager screen.
Multi-Tech Systems, Inc.
Chapter 8: Device Manager Installation & Operation
FF-120/220/420/820 FaxFinder Fax Server Admin User Guide
195