Setting The Back Light - Marantz NR1601 User Manual

Erasing the all sources
1
SET
Press and hold down and
SOURCE SEL until the LEARN
indicator blinks.
2
D.MODE
Press and hold down
and press ON and STANDBY .
LEARN indicator lights.
3
Press ENTER to continue erasing.
• The SEND indicator blinks twice and
the mode returns to LEARN mode.
• To cancel the erasing operation, do
ENTER
not press and simply press any
other button.
4
To return the normal mode, press
NOTE
Erasing codes will return to the factory preset code, or there will leave
empty if the button has no factory preset code.
SVENSKA SVENSKA NEDERLANDS NEDERLANDS
Operating learn mode

Setting the back light

Press the Light button on the side of the remote control, and the
buttons on the remote control light for 2 seconds. If the Light button
is pressed while the buttons are lit, the buttons remain lit for another
2 seconds.
• Backlight is set on in the factory settings.
n Disabling the backlight
Press and hold both
STANDBY
until the SEND indicator
flashes twice.
n Turning the backlight on
Press and hold both
until the SEND indicator flashes
twice.
SET
.
ESPAÑOL ESPAÑOL ITALIANO ITALIANO
SET and
SET ON
and
FRANÇAIS FRANÇAIS DEUTSCH DEUTSCH ENGLISH ENGLISH
59