Audio Adjust - Marantz NR1601 User Manual

Audio Adjust

The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently
set surround mode. For details on the adjustable parameters, see "Surround modes and surround
parameters" (vpage 66).
Menu operation
1
Press AMP to set the remote control unit to amplifier operation
mode.
2
Press MENU .
The menu is displayed on the TV screen.
3
Press ui to select the menu to be set or operated.
4
ENTER
Press to enter the setting.
RETURN
• To return to the previous item, press
MENU
• Exiting the Menu, press while the menu is displayed.
The menu display disappears.
Items that can be set with the Audio Adjust procedure
Surround Parameter (vpage 45)
Tone (vpage 46)
Audyssey Settings (vpage 46)
Manual EQ (vpage 48)
M-DAX (vpage 48)
Audio Delay (vpage 48)
Remote control operation
buttons
SVENSKA SVENSKA NEDERLANDS NEDERLANDS
.
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ESPAÑOL ITALIANO ITALIANO
Surround Parameter
Adjust surround sound parameters. It may not be possible to set this item depending on the input signal.
Setting items
HT-EQ ON : "HT-EQ" is used.
Soften the treble range OFF : "HT-EQ" is not used.
of movie soundtracks for
This can also be set by pressing
better understanding.
remote control unit.
D.Comp Low / Mid / High : These set the compression level.
Compress dynamic range OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).
DRC Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range the source. This can be set in the Dolby TrueHD mode.
(difference between loud Low / Mid / High : These set the compression level.
and soft sounds). OFF : Dynamic range compression is always off.
LFE –10dB – 0dB
Adjust the low-frequency
For proper playback of the different sources, we recommend setting
effects level (LFE).
to the values below.
• Dolby Digital sources : "0dB"
• DTS movie sources : "0dB"
• DTS music sources : "–10dB"
Center Image 0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
Panorama ON : Set.
Assign front L/R signal also OFF : Do not set.
to surround channels for
wider sound.
Dimension 0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
Center Width 0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.
Confirm the setting
FRANÇAIS FRANÇAIS DEUTSCH DEUTSCH
Default settings are underlined.
Setting details
HT-EQ
on the
Return to previous menu
ENGLISH ENGLISH
45