Marantz NR1601 User Manual page 51

Setting items
Dynamic EQ ®
ON : Use Dynamic EQ.
Solve the problem of OFF : Do not use Dynamic EQ.
deteriorating sound quality
as volume is decreased
• is displayed when set to "ON".
by taking into account
human perception and • This can also be set by pressing
room acoustics. Works with remote control unit.
MultEQ.
DYN EQ
Each time
Reference Level Offset 0dB (Film Ref) : This is the default setting and should be used when
Audyssey Dynamic EQ is listening to movies.
referenced to the standard 5dB : Select this setting for content that has a very wide dynamic range,
film mix level. It makes such as classical music.
adjustments to maintain 10dB : Select this setting for jazz or other music that has a wider dynamic
the reference response range. This setting should also be selected for TV content as that is usually
and surround envelopment mixed at 10 dB below film reference.
when the volume is turned 15dB : Select this setting for pop/rock music or other program material
down from 0 dB. However, that is mixed at very high listening levels and has a compressed dynamic
film reference level is not range.
always used in music or
Setting is enabled when "Dynamic EQ" is "ON" (vpage 47).
other non-film content.
Dynamic EQ Reference
Level Offset provides three
offsets from the film level
reference (5 dB, 10 dB, and
15 dB) that can be selected
when the mix level of the
content is not within the
standard.
Remote control operation
buttons
SVENSKA SVENSKA NEDERLANDS NEDERLANDS
Setting details
DYN EQ
on the
is pressed, the setting is changed as shown below.
Dynamic EQ : ON Dynamic EQ : OFF
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ESPAÑOL ITALIANO ITALIANO
Setting items
Dynamic Volume ®
Heavy : Most adjustment to softest and loudest sounds.
Solve the problem of large Medium : Medium adjustment to loudest and softest sound.
variations in volume level Light : Least adjustment to loudest and softest sounds.
between TV, movies and OFF : Do not use the "Dynamic Volume".
other content (between
quiet passages and
• is displayed when set to "ON".
loud passages, etc.) by
automatically adjusting to
• If "Dynamic Volume" is set to "Yes" in Auto
the user's preferred volume
Setup (vpage 9), the setting is automatically
setting.
changed to "Heavy".
• This can also be set by pressing
remote control unit.
DYN VOL
Each time
Dynamic Volume : OFF
Dynamic Volume : Light
Confirm the setting
FRANÇAIS FRANÇAIS DEUTSCH DEUTSCH
Audio Adjust
Setting details
DYN VOL
on the
is pressed, the setting is changed as shown below.
Dynamic Volume : Heavy
Dynamic Volume : Medium
Return to previous menu
ENGLISH ENGLISH
47