Operating The Connected Devices By Remote Control Unit; Operating Av Equipment; Registering Preset Codes - Marantz NR1601 User Manual

Operating the connected devices by remote control unit

Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.

Operating AV equipment

1
Press the input source select
button (vpage 21).
The operation mode of the remote
control unit is switched as shown in the
table.
NOTE
Press the input source select buttons once
to switch the operation mode of the remote
control unit supplied with this unit.
Press the input source select buttons twice
consecutively to switch the operation mode
of the remote control unit and input source
of this unit.
SVENSKA SVENSKA NEDERLANDS NEDERLANDS ESPAÑOL ESPAÑOL
Input
Devices controllable with the remote
source Input source
select of this unit
(Operation mode)
buttons
z
BD Device registered on the
DVD Device registered on the
z
z SAT
Device registered on the
GAME Device registered on the
AUX1
Device registered on the
USB Device registered on the USB button
z TV Device registered on the
z CD Device registered on the CD button
TUNER Radio of this unit
M-XPort Device registered on the M-XP button
z If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
NOTE
If the mode of the remote control unit is set to other than amp-
AMP
operation mode, press to switch the remote control unit to the
amp-operation mode to perform the following operations:
MENU
• For menu operation by pressing
• For setting the channel level of the unit by pressing
• For performing direct playback
• For switching the MultEQ, Dynamic EQ, and Dynamic Volume
settings.
• For using the Video Select function.
• For using the sleep timer function.
• For displaying the Source Select screen.
• For switching the M-DAX function.
• For directly selecting "AUTO" and "STEREO" of the listening modes.
2
Operate this unit or the device whose input source is
switched.
• For details, refer to the operating instructions for each device.
For operations of iPod and TUNER, see the following pages.
• iPod (vpage 22)
• TUNER (vpage 25)
ITALIANO ITALIANO FRANÇAIS FRANÇAIS

Registering preset codes

control unit When preset codes are registered in the included remote control unit,
it can then be used to operate any devices you have, such as DVD
players or TVs made by different manufacturers.
BD
button
n Buttons used for operating the devices
DVD
button SOURCE ON/OFF
q
For switching power of each device on or off.
SAT
button
uio p ,
w
For menu operation of each device.
GAME
button
MENU SETUP
,
e
For displaying the menu of each device.
AUX1
button
1 , 2 , 3 , 6
r
t Number button (
PRESET +
,
y
TV
button TV POWER
u
For operating a TV
This button is enabled in any mode.
For details on operation with the remote control unit, see pages 22
to 23, 25, and 57.
n Default settings for preset codes
The devices shown below are registered for each input source
button as default. Settings can be changed according to the
devices to be used.
Input source select
buttons
CH LVL
NOTE
• No preset codes other than
registered.
• In the factory settings, remote control codes for all Marantz products
are registered.
DEUTSCH DEUTSCH ENGLISH ENGLISH
ENTER
TOP MENU
,
, 7 , 8 , 9
0 9 +10
– , )
PRESET –
TV INPUT
,
Category Preset code
Blu-ray Disc player
5000
DVD player 2000
Television
1000
Satellite set top box 4000
CD player
3000
BD DVD TV SAT CD
, , , and can be
55