Information - Marantz NR1601 User Manual

Setting items
On-Screen Display USB : Set the USB screen display time when the input source is "USB".
(Continued) • Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
TUNER : Set the tuner screen display time when the input source is
"TUNER".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
ON : Display is always on.
Display
Set the display on/off Display Auto OFF : Display is off except
setting. when showing the status display.
Display OFF : Display is always off.
This can also be set by pressing
on the remote control unit or main unit.
Each time
is changed as shown below.
ON
ON : Turn protection on.
Setup Lock
Protect settings from OFF : Turn protection off.
inadvertent change.
When canceling the setting, set "Setup Lock" to "OFF".
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "SETUP LOCKED!" is displayed if you attempt
to operate related settings.
· Menu operations
· M-DAX
· MultEQ ®
Remote control operation
buttons
SVENSKA SVENSKA NEDERLANDS NEDERLANDS
Manual Setup
Setting details
DISPLAY
DISPLAY
is pressed, the setting
Display Auto Off
Display OFF
· Dynamic EQ ®
· Dynamic Volume ®
· Channel Level
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ESPAÑOL ITALIANO ITALIANO

Information

Show information about receiver settings, input signals, etc.
Items
Select Source / Name / Surround Mode / Input Mode /
Status
Show information about Decode Mode / Video Select / Video Mode / Content Type etc.
current settings.
NOTE
The information displayed differs according to the input source.
Audio Input Signal Surround Mode : The currently set surround mode.
Show information about Signal : The input signal type.
audio input signals. fs : The input signal's sampling frequency.
Format : The number of channels in the input signal (front, surround, LFE).
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. "MATRIX" is displayed with Dolby Digital EX and DTS-ES Matrix
signals, "DISCRETE" with DTS-ES Discrete signals.
This function is automatically activated when
playing Dolby Digital sources.
It automatically corrects the standard signal
level for individual program sources.
The correction value can be checked using
STATUS
.
HDMI Information HDMI Signal Information
Show information about • Resolution / Color Space / Pixel Depth
HDMI input/output signals
HDMI Monitor Information
and monitor.
• Interface / Suport Resolution
A / B / C / D / E / F / G
Preset Channel
Show information about A1 – A8 / B1 – B8 / C1 – C8 / D1 – D8 / E1 – E8 / F1 – F8 / G1 – G8
preset channels.
TUNER
Confirm the setting
FRANÇAIS FRANÇAIS DEUTSCH DEUTSCH
Setting details
Dialogue normalization function
The figure is the corrected
value. This cannot be
changed.
Return to previous menu
ENGLISH ENGLISH
53